Dual-Channel Gate Drivers with Sourcing and Sinking Current Capability of 5A, Featuring 13ns Typical Propagation Delay
3PEAK's TPM2752x family is a series of dual-channel low-side gate drivers for MOSFET, IGBT and GaN power switches. High sourcing and sinking current capability of 5A allows improving switching efficiencies by minimizing slew time and switching loss. The device supports maximum 25V supply voltage and –5V and improves system robustness especially in noisy industrial applications. Ultra-low propagation delay and excellent matching between two channels are designed for applications with tight timing requirements.
The TPM2752x family consists of a set of gate-drivers with different polarities, allowing customers to select based on application needs. The wide range of package support from SOP-8, EMSOP-8, DFN3×3-8 aligns with industrial standard packages. An extra ultra-small DFN2×2-8 assists design for ultra-compact synchronous rectifiers in power bricks.
Features:
· Industry-Standard Pin-Out
· 4.5V to 23V Single-Supply Range
· Dual Independent Channels
· 5A Peak Source and Sink-Drive Current
· Independent-Enable Function for Each Output
· TTL and CMOS Compatible Threshold
· Outputs Held Low During VDD-UVLO or Input Floating
· Low Propagation Delay (13ns Typical)
· Fast Rise and Fall Times (7ns and 6ns Typical)
· <1ns Typical Delay Matching Between Two Channels
· Two Outputs can be used in Parallel for Higher Drive Current
· ESD Protection Exceeds JESD 22 – 6kV HBM, 1.5kV CDM
· Available in SOP-8, EMSOP-8 and DFN3×3-8, DFN2×2-8 Packages
Applications:
· Switched-Mode Power Supplies
· DC-DC Converters
· Motor Control, Solar Inverters
· Gate & IGBT Drive
Pinout Diagram
Order Information
- 【Datasheet】TPM2752x Dual 5-A High-speed, Low-side Gate Driver
- 【Datasheet】TPM2752x Low-Side Gate Driver
- 【Datasheet】TPM2752X, Dual 5-A High-Speed. Low-Side Gate Driver
- +1 Like
- Add to Favorites
Recommend
- 3PEAK Announces TPM2351x Series Isolated Gate Drivers with ±150-kV/μs CMTI and 70-ns Transfer Delay
- 3PEAK‘s Automotive-Grade Test Center Officially Commences Operations
- 3PEAK Honored as “Innovative Electronics Industry Enterprise“ with Six Automotive Products Included in the Catalog
- 3PEAK Isolation Products Are Certified to a Full Range of Safety Standards Including VDE, TÜV, UL, CSA, CQC, and CB
- The Only Company in China Included in the IBEE ESD Report! 3PEAK‘s Complete Series of Automotive CAN Transceivers in Mass Production
- 3PEAK Achieves ISO 26262:2018 ASIL D Process Certification, the Highest Level of Automotive Functional Safety
- 3PEAK Partners with IAR to Build a New Embedded Development Ecosystem Basing on Mainstream TPS32 Series MCUs
- 3PEAK Unveiled a Next-Generation Automotive-grade High-current Linear Regulator TPL8151Q Supporting Wide Range Input of 29V
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.