Frequency Band Differences Between LTE Cat 1 and LTE Cat 4

PublishTime： 2023-10-22 Article Source：usr News

LTE Cat 1 Modem and LTE Cat 4 Modem are two different data transmission units based on LTE (Long-Term Evolution) network. The differences between them are mainly reflected in the following aspects:

Data Rate: The LTE Cat 1 Modem supports a maximum data rate of 10 Mbps (downlink) and 5 Mbps (uplink), while the LTE Cat 4 Modem supports a maximum data rate of 150 Mbps (downlink) and 50 Mbps (uplink). Therefore, the LTE Cat 4 Modem has a higher speed and can achieve faster data transmission.

Network adaptation: LTE Cat 1 Modem is applicable to Category 1 of the LTE network, while LTE Cat 4 Modem is applicable to Category 4 of the LTE network. Category 1 networks are suitable for low-power, low-rate Internet of Things applications, while Category 4 networks are suitable for more intelligent devices and applications, with higher speed and performance.

Supported bands: LTE Cat 1 Modem and LTE Cat 4 Modem may have different band support depending on the device and vendor. Generally speaking, LTE Cat 4 Modem supports a wider range of frequency bands and can be used in more operators and regions.

Power consumption and cost: The LTE Cat 1 Modem is lower in power consumption and cost than the LTE Cat 4 Modem because it supports lower speed and power requirements. This makes LTE Cat 1 Modem suitable for some application scenarios that do not require high speed, but are sensitive to power consumption and cost.

There are differences between the LTE Cat 1 Modem and the LTE Cat 4 Modem in terms of data transmission rate, network adaptation, band support, power consumption, and cost. The selection of the appropriate Modem depends on the requirements of the specific application, including data transmission rate, network coverage requirements, and budget constraints.

Difference between LTE cat 1 and LTE cat 4 modem

LTE Cat 1 Modem

CAN-Modem is used in CAN networks with baud rates up to 1Mbps, and all channels can operate at different baud rates. The CAN-Modem complies with CAN specifications 2.0 A and 2.0 B and can be used with various high-level CAN protocols (CANOpen, SDS, J1939, DeviceNet, or other customized protocols).

The CAN-Modem can be configured by connecting to a PC through an asynchronous serial communication interface; The configuration software based on the Windows system is provided, which is easy to use and supports the configuration to take effect immediately. After the device configuration is completed, it can be put into operation without any operation.

With one RS232 serial interface and two RS485 interfaces

● Support for process data objects (12 TPDOs and 12 RPDOs)

● Support Service Data Objects (SDO Server)

● Support Emergency Message Object (Emergency)

● Support for synchronous message objects (Sync)

● Support Network Configuration Object (LSS Slave)

● Support network time consumption

● Support the setting of slave station number (1 ~ 31) and can baud rate (10kbps-1000kbps) by the dial switch

● Industrial grade plastic housing, standard DIN rail mounting

Lte Cat 4 Modem

4G Modem is a wireless data terminal of the Internet of Things, which has the function of wireless long-distance data transmission. High-performance industrial 16/32-bit communication processor and industrial wireless module are adopted, the embedded real-time operating system is used as a software support platform, and RS232 and RS485 (or RS422) interfaces are provided, which can be directly connected to serial devices to achieve transparent data transmission.

High-performance industrial-grade wireless module, high-performance industrial-grade 16/32-bit communication processor, metal shell, protection grade IP30. Metal enclosure and system safety isolation, especially suitable for industrial control field applications, wide power input (DC 5~35V).

Stable and reliable, WDT watchdog design to ensure system stability, a complete anti-drop mechanism to ensure that the data terminal is always online, RS232/RS485/RS422 interface built-in 15KV ESD protection, SIM/UIM card interface built-in 15KV ESD protection, power interface built-in reverse phase protection, and overvoltage protection. Lightning protection for antenna interface (optional).

Standard and easy to use, providing standard RS232 and RS485 (or RS422) interfaces, which can be directly connected to serial devices, intelligent data terminals, which can enter the data transmission state when powered on, providing powerful central management software, facilitating equipment management (optional), easy to use, flexible, multiple working modes, convenient system configuration, and maintenance interfaces. Support serial port software upgrades and remote maintenance.

Powerful, supporting dual data center backup transmission and multi-data center synchronous transmission (5 data centers), supporting access center according to domain name and IP address, embedded standard TCP/IP protocol stack, supporting transparent data transmission, and supporting APN/VPDN.

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

New Products & Solutions

More>

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Integrated Circuits