1024 x 8 Bits of EEPROM with Write Protect Function and Programmable Security Code
GIANTEC's GT23SC4428 contains 1024 x 8 bits of EEPROM with programmable write protection for each byte. Random read access to any byte in the memory is always possible. The memory can also be erased and written byte by byte. Erasing old data in the byte location must be performed before new data can be written to the location. Each byte in the memory has a corresponding protect bit. The protect bits are only one-time programmable and cannot be erased. After the protect bits are enabled (logic 0), the corresponding bytes can never be changed again. A write-protect bit with a data-compare function is available for the user to verify the data in the memory before enabling the protect bit.
In addition, it offers two bytes of Programmable Security Code (PSC) against unauthorized memory write/erase operations. All the memory, except for the PSC can always be read, but the memory can be written or erased only after PSC verification. If the user fails to enter the correct PSC in eight consecutive attempts, the device will block any further PSC entry attempts and the memory can never be erased or written again.
The PSC bytes are pre-programmed by the manufacturer with a code, which is specified for the customer for device transport security purposes before the devices are shipped to the customer. The Error Counter will be pre-erased by the manufacturer to allow maximum attempts (maximum of eight) for PSC entry.
Fig.1 BLOCK DIGRAM
●FEATURES：
▲Standard CMOS process
▲1024 x 8 bits EEPROM organization
▲ Byte-wise addressing
▲ Byte-wise erase/write
▲ Irreversible byte-wise write protection
▲ Single 5V power supply for reading and write/erase
▲ Low power operation:
♦ 3 mA typical active current
▲ 5 ms programming time
▲ 3-wire serial interface
▲ 20 KHz serial clock rate
▲ Contact configuration and serial interface, ISO standard 7816 (Synchronous Transmission) compatible.
▲ High ESD protection: > 4 kV
▲ High reliability:
♦ 1,000,000 erase/write cycles guaranteed
♦ 10 years data retention
▲Wide operating temperature range
♦0 to +70°C Commercial; –40 to +85°C Industrial
▲2-byte Programmable Security Code (PSC) for memory write/erase protection
●ELECTRICAL CHARACTERISTICS：
Table 1 ABSOLUTE MAXIMUM RATINGS
●GENERAL COMMAND DESCRIPTIONS：
Table 2 Control Words for IS23SC4418/4428 Commands
- +1 Like
- Add to Favorites
Recommend
- 16K Bits Secured Serial EEPROM with 1,000,000 Writes/Erase Cycles
- GT23SC4442 256 Byte EEPROM with Write Protect Function and Programmable Security
- SMART Joined Hands with Sekorm- Electronic components distributor China
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- Building Excellent Intelligent Meter Solutions with Diodes, Transistors, LDOs and EEPROMs
- ROHM Introduced New BR24H-5AC Series 125°C Operation Compatible I²C Bus EEPROMs Extending Service Life
- PMICRO Launched PL51 Series Chips with ADC Function, Integrated Real EEPROM MCU and Built-in Single Cycle ET8051 Core
- Renesas’ New RZ/T2L Industrial MPU Enables Fast and Accurate Real-Time Control with EtherCAT Communication
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
