A Motor Control Solution for Ceiling Fan Using Renesas MCU RX13T
Motor applications are required to save energy, reduce system cost, and realize the integration of electronics and mechanics.In this article, Renesas will introduce a motor control solution for ceiling fan using MCU RX13T that realizes these requirements.
This solution realizes motor and power supply control with a single chip while reducing external peripheral components by utilizing the build-in functions of the RX13T, and simultaneously achieving added values such as system cost reduction and energy saving.
This solution has three features as below:
1、Reduces peripheral components and adopts a single-sided PCB board for reduction in board cost.
With RX13T built-in features such as high-speed on-chip oscillator (HOCO) that ensures ±1% even when stress occurs or due to deterioration over time, programable gain amplifier (PGA), and comparator, external peripheral components can be reduced and a cheaper single-sided board can be adopted.
2、Realizes implementation of smaller inductor on-board by High frequency PFC for power supply.
For the integration of electronics and mechanics, a smaller inductor was mounted on-board using high frequency PFC (carrier frequency of 50KHz) to replace a much bigger size transformer, which could not be mounted on-board before.
3、Realizes motor control (FOC + pickup control) and PFC control with a single chip.
Realizes motor control by FOC with pickup control that can restart during free-running, and PFC control (continuous current mode) with a single chip. This solution offers high power factor of about 99%, which is significantly improved comparing to other products without PFC offering which is about 65%.
*As a support tool for motor control development, you can use Desk Top Lab ICS(In Circuit Scope) or Renesas Motor Workbench 2.0.
Renesas provides the Application Note, schematic of ceiling fan inverter board(Gerber data, BOM list), and the control software free of charge. You can start to build a system immediately by referring to this solution.
- +1 Like
- Add to Favorites
Recommend
- Renesas‘s RX13T Sensorless 120 Deg Solution for Small Appliance Motor Control
- RX13T 32-bit MCU QFN Package Are Now Available, Contributing to the Miniaturization of Inverter Boards
- Renesas Develops New Motor-control-specific RX Microcontroller Based on Specific Customer Requirements
- Renesas Programmable Motor Driver ICs Are First to Enable Full Torque at Zero Speed for Sensorless Brushless DC Motors
- Renesas DSP Solution on Renesas Lab on the Cloud, Input Analog Signals Directly From A Signal Generator To The Rx231 Microcontroller Evaluation Board
- Renesas‘ Low-voltage Motor Drive Solution Addresses the Key Requirements For Consumer Appliances Due to Their Safety, Smaller Form Factor, Optimized Cost
- Renesas‘ Semiconductor Manufacturing Factory (Naka Factory) Fire: Production Capacity Has Recovered to 88%
- Silicon Labs Expands MCU Platform with a 50MHz Core Frequency New BB5 8-bit MCU Family
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.