4 1/2-digit, Dual-slope-integrating ADCs Offer 50-ppm Resolution with a Maximum Linearity Error of One Count

2021-08-18 Xinluda
analog-to-digital converters,ADCs,XD7135DIP-28,XL7135CDSOP-28

XINLUDA's 4 1/2-digit, dual-slope-integrating, analog-to-digital converters (ADCs) are designed to provide interfaces to both a microprocessor and a visual display. The digit-drive outputs D1 through D4 and multiplexed binary-coded-decimal outputs B1, B2, B4, and B8 provide an interface for LED or LCD decoder/drivers as well as microprocessors.


The XD7135DIP-28 and XL7135CDSOP-28 offer 50-ppm(one part in 20,000) resolution with a maximum linearity error of one count. The zero error is less than 10 μV and the zero drift is less than 0.5 uV/C. Source-impedance errors are minimized by a low input current(less than 10 pA). Rollover error is limited to ±1 count.


The BUSY, STROBE, RUN/HOLD, OVER RANGE, and UNDER RANGE control signals support microprocessor-based measurement systems. The control signals also can support remote data acquisition systems with data transfer through universal asynchronous receiver transmitters(UARTs).


The XD7135DIP-28 and XL7135CDSOP28 are characterized for operation from 0°℃ to 70℃.


Fig.1 DW OR N PACKAGE


Characteristic

●Zero Reading for 0-V Input

●Precision Null Detection With True Polarity at Zero

●1-pA Typical Input Current

●True Differential Input

●Multiplexed Binary-Coded-Decimal(BCD) Output

●Low Rollover Error:±1 Count Max

●Control Signals Allow Interfacing With UARTs or Microprocessors

●Autoranging Capability With Over-and Under-Range Signals

●TTL-Compatible Outputs

●Second Source to Teledyne XD7135, Intersil X17135CD,Maxi,  X17135CD

●CMOS Technology


ELECTRICAL CHARACTERISTICS:


Table.1

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: