Taitien Provides A Variety of Miniature, Low-power Consumption, High-precision, and Wide-temperature Quartz Crystals

2023-04-18 TAITIEN News
Quartz Crystal,High Precision Quartz Crystal,XB1040,XB2060

Quartz Crystal is an electronic component that utilizes the piezoelectric effect of quartz to generate high-precision oscillation frequencies. Quartz has become an important component that is widely used in various electronic devices due to its physical characteristics of low-temperature coefficient and high Q value. TAITIEN is one of the few manufacturers that owns its in-house wafer-cutting technology. By vertically integrating the production of upstream quartz wafers, wafers' angles and thicknesses are cut precisely so as to control the material source and quality. Taitien is keenly aware of the mainstream development of electronic products that are light and thin, as well as the demand for high-speed transmission and high-frequency communication. TAITIEN provides a variety of miniature, low-power consumption, high-precision, and wide-temperature quartz crystals to satisfy customers' diversified needs for quartz components.


The TAITIEN Advantage

Industry 4.0 is introduced to build the Internet of Machines and realize smart manufacturing to satisfy customers' needs

Quartz crystal and oscillation circuit loop analysis are provided to enable customers to find the most stable matching combination

Readily available with better delivery time which quickly supports samples and follow-up mass production services


Applications

5G mobile phone (smartphone), smart meter, smart home, IoT, Wi-Fi 6/6E, Bluetooth, Low-Power Wide Area Network (LPWAN), desktop/ notebook/ gaming computers, smart cockpit, in-vehicle communication, long and short-range radar, car infotainment and edge computing products


Key Products

  • kHz Quartz Crystal Series (kHz XTAL)

High stability: annual aging rate lower than ±3ppm

High Q (quality factor) value: tuning fork crystal design

Low power consumption: drive Level of 0.1±0.01μW


  • MHz Quartz Crystal Series (MHz XTAL)

Excellent frequency stability as low as ±5ppm

Wide temperature range which complies with automotive requirements from -40℃ to +125℃

Ultra-small package and ultra-thin of 0.3mm which is ideally suited for low circuit board height or ultra-small wearable applications



Excellent power-on characteristics: Since the thermal overshoot of an SC-cut resonator is about 2 orders of magnitude smaller than an AT-cut, the SC-cut crystal oscillator can quickly reach its frequency stability after powering up. In general, the stability can reach 2×10-9 after powering up for 6 minutes.

Low aging: The stress effect of the SC-cut resonator is small and the aging caused by stress relaXAtion is also small. The aging rate can reach 10-11/d.

Outstanding short-term frequency stability: After the drive level is increased, the signal-to-noise ratio relative to the white noise is increased, thus the far-end phase noise can be improved. Currently, the highest level can reach -160~-170dBc/Hz.




  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: