AHT20 Integrated Temperature and Humidity Sensor with 3x3mm Bottom, I²C Interface
ASAIR lauched an Integrated temperature and humidity Sensor AHT20. AHT20, as a new generation of temperature and humidity sensors, has established a new standard in size and intelligence. It is embedded in a double row flat no-lead package suitable for reflow soldering, with a bottom of 3 x 3mm and a height of 1.0mm. The sensor outputs calibrated digital signals in standard I. AHT20 sets a new standard in terms of size and performance: a two-row flat pin less SMD package suitable for reflow soldering, bottom face 3x3mm, height 1.0mm. The sensor outputs calibrated digital signals in standard IIC format.
Product Feature
• Full calibration
• Digital output, I²C interface
• Excellent long-term stability
• SMD package suitable for reflow soldering
• Quick response and strong anti-jamming capability
AHT20 is equipped with a newly designed ASIC dedicated chip, an improved MEMS semiconductor capacitive humidity sensor element and a standard on-chip temperature sensor element. Its performance has been greatly improved or even exceeded the reliability level of the previous generation of sensors. A generation of temperature and humidity sensors have been improved to make their performance more stable in harsh environments.
Each sensor is calibrated and tested, and the product lot number is printed on the surface of the product. Due to improvements and miniaturization of the sensor, it is more cost-effective, and ultimately all devices will benefifit from cutting-edge energy-saving operation modes. Due to the improvement and miniaturization of the sensor, its cost-effective ratio is higher, and finally all equipment will benefit from the cutting edge energy-saving operation mode.
Technical parameter
Application Scope
HVAC, dehumidifier, testing and inspection equipment, consumer products, automobiles, automatic control, data loggers, weather stations, home appliances, humidity control, medical and other related temperature and humidity detection and control.
- 【Datasheet】AHT20 Temperature and Humidity sensor Product manuals
- 【Datasheet】AHT20 Humidity and Temperature Sensor Data Sheet
- +1 Like
- Add to Favorites
Recommend
- ASAIR Established a Subsidiary Silicon Core Materials
- ASAIR Launches DHT20 capacitive Temperature And Humidity Sensor with a Fully Calibrated Digital IIC Interface
- ASAIR Electronics‘ 6-inch MEMS Sensor Chip Production Line Put into Operation Officially
- ASAIR Launches a New AMS2106 Intelligent Digital Gas Mass Flowmeter with High Sensitivity
- ASAIR‘s Latest AMS2106 Intelligent Digital Gas Mass Flow Meter with High Stability in the Full Range
- The Difference Between Dew Point Transmitter and Temperature and Humidity Transmitter
- Introduction to Temperature and Humidity Sensor
- Several Common Measurement Methods of Humidity Sensor
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
