Kendeil Develops New Modular Film Capacitor K7F Series with High Energy Density and Withstand Voltages up to 900V

PublishTime： 2024-11-15 Article Source：KENDEIL

Kendeil is proud to announce the development of a new modular solution based on metallized polypropylene capacitors technology.

The increasing industry demand of capacitors with higher and higher specific capacitance and at the same time the necessity to have a product that is as limited in volume as possible, has pushed us to create a modular capacitor in film technology with high energy density and capable of withstand voltages up to 900V.

Intended as a stand-alone, plug and play solution, the modular film capacitor K7F series will allow customers to not use anymore expensive bus bars, lowering also the assembly costs.

Applications: Design on purpose for DC filtering and DC-link circuits for EV/HEV. It can be suitable also for general purpose high power industrial applications.

Main electrical properties: Dielectric: Metallized Polypropylene Film, Voltage Range: 450 to 900Vdc, Dissipation Factor: ≤ 0.002 @100Hz, Operating Temperature Range: -40 to +105℃. Insulation resistance: ≥10000s @25℃, 500V, 60s. Failure rate ≤50FIT. Voltage test between terminals and case: 3000Vac @50/60Hz for 10s.

Main features: Metallized polypropylene film, enclosed in cylindrical PPS case with UL 94-V0 certification. Automotive Grade AEC-Q200D. Reference standard: IEC 61071. THB Grade IIIB.

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Integrated Circuits