GreenWaves Technologies Produced a Prototype of a New Wireless Modem for the IoT

2024-08-11 GREENWAVES Official Website
LPWAN wireless modem,sensors,FPGA development board,evaluation board

GREENWAVES Technologies just produced a prototype of a new wireless modem for the IoT.


It is implementing the GreenWaves LPWAN wireless modem dedicated to the high data rate LPWAN applications. This model includes a NUCLEO development board, a XILINX Zynq-7000 FPGA development board and an ATREB215-XPRO evaluation board instantiating an ATMEL AT86RF215 analog front-end.


The interface with the sensors and the board configuration are processed by the STM32 microprocessor on the NUCLEO board. The GreenOFDM digital modulation is implemented on the XILINX ZYNQ-7000 FPGA. The ATMEL AT86RF215 circuit is a full modem of the 802.15.4g standard from which GreenWaves only uses the OFDM front-end implementation. The GreenOFDM wireless modem running on the XILINX ZYNQ-7000 FPGA generates the IQ signals that are then sent via a serial link to the analog front-end of the ATMEL circuit.


This board prototype will allow GreenWaves Technologies to deploy high data rate low power communicating objects in an existing LPWAN network.


In a second phase, this board prototype will be integrated on one standalone board. It will be available to early adopters for prototyping communicating objects applications.


In a third phase, the FPGA will be replaced by an ASIC. This full GreenOFDM wireless modem will be manufactured and delivered to customers.


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: