Kendeil Develops New 3-Phase Aluminum CAN Film Capacitor with Screw Terminal Blocks, Providing with a Delta Connection
Kendeil is proud to announce the development of a new 3-phase aluminium can film capacitor with screw terminal blocks, provided with a delta connection.
Whenever there is the need to correct the power factor to compensate for inductive loads, especially in high power devices and for industries' power consumptions, customers can now use KENDEIL's newest 3-phase aluminium film capacitors. Equipped with 6 connection points (screw terminal block) with a Δinternal connection, KENDEIL's K5F capacitors can be directly connected to the input power line. The stud termination option is preferred if customers need to mount the capacitors on a heatsink and also to prevent capacitor movements under vibration conditions. This new series represents also a cost and space saving solution, allowing customers to mount only one 3-phase capacitor instead of 3 single phase ones.
Applications: Designed for industrial applications such as power factor correction in 3-phase systems and harmonics filtering at the AC output of large inverters.
Main electrical properties: Dielectric: Metallized Polypropylene Film, Voltage Range: 230 to 850Vac, Dissipation Factor: ≤0.002@100Hz, Operating Temperature Range: -40 to +85℃, Reference Standard: IEC 61071.
Main features: Metallized polypropylene film, enclosed in cylindrical aluminium case and filled with soft polyurethane resin. Equipped also with an overpressure disconnector device that automatically disconnect the capacitor from the rest of the circuit whenever a high internal pressure is generated.
- +1 Like
- Add to Favorites
Recommend
- Kendeil Develops New Electrolytic Modular Solution K1M and K2M
- Kendeil Launched Compact Screw-type Electrolytic Capacitors K93 and K94 with Low ESR
- Kendeil Presented the DC link Film Capacitors K37 with Capcitance of 260 to 600μF
- Kendeil Announced Two Families of Snap-in Type Capacitors K25 and K26 at 500VDC, Low ESR and High Ripple Current
- Kendeil Announced Incredible Modular Electrolytic Capacitors K1M and K2M with 40% Higher Ripple Current
- Kendeil Presented the Screw Terminal Type Capacitors K91 and K92, Featuring a Rated Voltage of 500VDC
- Kendeil’s Two Snap-in Type Capacitors K85 and K95 Feature Extreme Miniaturization, Low ESR and High Ripple Current
- Kendeil Announced DC Link Power Film Capacitors K36 Type for Demanding Industrial Applications
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.