The Role of Subnet Mask
Network segmentation: Subnet masks achieve network segmentation by distinguishing between the network and host parts of an IP address. Different subnet masks can divide the same IP address segment into networks of different sizes to meet different network requirements.
Isolate broadcast domains: Within a subnet, broadcast messages are only sent to hosts within the same subnet, and do not cross subnet boundaries. This allows network administrators to more effectively control broadcast traffic, reducing network congestion and potential security risks.
Enhance security: Through rational subnet division, network isolation and access control can be achieved, thereby enhancing network security.
Defining network boundaries: Subnet masks clearly define the boundaries of different networks by distinguishing between the network and host parts of an IP address. This allows devices in the network to clearly recognize which network they belong to, enabling isolation and communication control between networks.
Optimizing broadcast domains: Within a subnet, broadcast messages are restricted from propagating within the same subnet, effectively reducing unnecessary broadcast traffic and avoiding network congestion and potential security risks. The subnet mask is the key to enabling this mechanism.
Enhance network flexibility: By adjusting the subnet mask, network administrators can flexibly divide the network to accommodate different network sizes, device counts, and communication requirements. This flexibility provides strong support for complex and dynamic network layouts in the industrial IoT environment.
Enhancing security: Reasonable subnet division and subnet mask settings help to achieve network access control and restrict access by unauthorized devices, thereby enhancing network security.
Calculation Method of Subnet Mask
The calculation of subnet mask is usually based on the requirements of network planning. Given the IP address and the number of required subnets or hosts, the subnet mask can be calculated by the following steps:
Determine the number of subnets or hosts: First, determine how many subnets need to be divided or how many hosts each subnet needs to accommodate.
Calculate subnet bits: Based on the number of subnets or hosts, calculate the number of host bits to borrow as the subnet bits. This usually involves logarithmic operations and rounding operations.
Determining the subnet mask: Keep the network part of the IP address, which is the default subnet mask, unchanged. Borrow the part that needs to be used as the subnet bit number from the host part, which is the default subnet mask, and set it to 1. The remaining part remains at 0.
The Setting Principle of Subnet Mask in Industrial Router
In the IIoT environment, the subnet mask setting ofIndustrial Routeris a key step to ensure stable and efficient network operation. The setting principle mainly includes the following aspects:
Network planning: First, based on the actual needs and network architecture of the industrial site, a reasonable network layout and subnet division scheme is planned. This includes determining the hierarchical structure of the core network, aggregation network, and access network, as well as the number of subnets and hosts required at each level.
Subnet mask selection: Select the appropriate subnet mask for each level of router based on the results of network planning. The selection of subnet mask should fully consider factors such as network size, number of devices, communication requirements, and future scalability.
Configuration and verification: Configure the corresponding subnet mask on the Industrial Router, and verify the connectivity and subnet division effect of each network device through ping commands, traceroute, and other tools. At the same time, it is also necessary to ensure that the subnet mask settings do not conflict with other network devices.
V.
Precautions
Avoiding conflicts: Ensuring that subnet masks do not conflict between different subnets is the cornerstone of stable network operation. When planning a network, full consideration should be given to existing network architecture and future expansion needs to avoid communication problems caused by overlapping or conflicting subnets.
Reasonable planning: Subnet masks should be reasonably planned based on the network size, number of devices, and communication requirements. Too small subnet masks may lead to insufficient hosts within the subnet, limiting network expansion; while too large subnet masks may waste IP address resources and increase network management difficulty.
Consider future expansion: When setting the subnet mask, you should reserve some expansion space to cope with future growth in network size and the number of devices. This helps reduce the complexity and cost of future network modifications.
Security considerations: Through reasonable subnet division and subnet mask settings, access control to the network is achieved, limiting access to unauthorized devices. At the same time, other security measures such as firewalls and intrusion detection systems are combined to create a secure network environment.
Document recording: Record the subnet mask setting information of each subnet in detail, including subnet address, subnet mask, available host range, etc. This is helpful for subsequent network maintenance, troubleshooting, and performance optimization.
Reasonable subnet division and subnet mask settings help improve network security and reduce potential security risks.
The setting principle of the subnet mask for Industrial Router involves network planning, subnet mask selection, configuration, and verification. By deeply understanding these principles and making reasonable settings based on actual needs, it can ensure the stable, efficient, and secure operation of the Industrial IoT network.
- +1 Like
- Add to Favorites
Recommend
- Can the Industrial Router be Used at Home?
- Configuring Industrial Router Settings
- How about PUSR industrial router
- Network speed factors affecting Industrial Router
- What is the Difference between an Industrial Router and a Cellular Router?
- Application Scenarios and Parameter Selection of Industrial Router
- Solutions to Industrial Router WiFi Weak Signal
- Benefits and Application of Industrial Router
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.