How to Detect the Quality of Fast Recovery Diode
How to measure the quality of fast recovery diode? When the fast recovery diode circuit failure, to measure the quality of fast recovery diode, this time how to do? In the amateur condition, the multimeter can be used to detect the one-way conductivity of fast recovery diode, ultra-fast recovery diode, and the internal open-circuit, short-circuit fault, and can measure the forward conduction voltage drop. If equipped with Megohm meter, can also measure the reverse breakdown voltage. Below let Ling Xun electronic take you to know how to detect the fast recovery diode.
In fact, the fast recovery diode and plastic packaging silicon diode detection method is the same, that is, the first RX1K block to test its one-way conductivity, the general forward resistance of several thousand euros, the reverse resistance is infinite; Again with RX1 block retest, general forward resistance for a few euros, reverse resistance is still infinite. If the measured resistance values are ∞ or 0, then the measured tube is damaged. The detection method of fast recovery diode is basically the same as the above method, but it must first determine which pin is the common end, and then use the above method to detect each fast recovery diode.
- +1 Like
- Add to Favorites
Recommend
- LXMICRO Fast Recovery Diode MUR1640CT with a Average Rectified Forward Current IF of 16A and Current IFSM of 125A
- The Difference Between a Schottky Diode and a Fast Recovery Diode
- Why Fast Recovery Diodes Have Higher VF
- Ultra-Fast Soft Recovery Diode Module F45D60U, Featuring Ultrafast Recovery Time, Low Recovery Loss and Soft Reverse Recovery Characteristics
- Ultra-fast Recovery Diode ES1GF Can be Used in Switching Power Supply, LED Lighting and Inverter Applications
- ROHM’s New 4th Gen Fast Recovery Diodes Deliver Low Loss Performance Together with Ultra-Low Noise Characteristics
- SLKOR Has the Internationally Leading Technologies on the SiC MOSFET and the Fifth-generation Ultra-fast Recovery Power Diode SBD
- Low Voltage Drop High Junction Temperature Schottky Diode HBT20L200DC from LXMICRO Adopts TO-263 Packaging
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.