How to Ensure The Safety of Switching Power Supply When Dealing with Fault?
Do you know what problems should be paid attention to in the process of dealing with failures? To keep everyone safe.
(1) most of the time in the process of fault processing induction power actual operation, so we must pay attention to can not cause DC output, communication AC input short circuit, all kinds of maintenance special tools must do a good job of insulation layer treatment, to ensure the safety of life and switch power supply machine equipment power supply safety.
(2) in the actual operation to single-handed operation as far as possible, the actual operation hand hand does not allow to contain metal material electric conductor decorations, such as watches, keys, rings, etc., together with the insulation shoes for switching power supply equipment maintenance.
Fig.1
(3) In the process of dealing with the fault of the switching power supply, the power down again must be temporarily cancelled to avoid the power supply of the communication power system software caused by the operation error.
(4) in the AC, DC power distribution equipment system software does not know the situation, do not need to open or turn off the communication AC power supply switch casually or by feeling, let alone plug in, pull out the DC fuse or close the DC output leakage protection switch. Avoid the deepening and expansion of the fault range.
(5) When measuring instruments and instrument panels are used to test switching power supply machinery and equipment, attention should be paid to the proper use instructions of instruments and equipment and instrument panels, so as to prevent the destruction of instruments and equipment and instrument panels, and even affect the power supply of communication power system software.
(6) dc output of all kinds of communication power supply system software work basic parameters can consult relevant materials and power consumption equipment of switch power supply, machinery and equipment of the voltage regulation, at the same time, the battery should be fully considered floating current limit, no clear index can’t literally set on the spot, in case of accident cause equipment damage and power supply switch power supply.
(7) after the repair of machinery and equipment, it should be cleared of all kinds of maintenance tools on the spot and the application of maintenance, check whether there are other items left in the frame of the switching power supply machinery and equipment, such as gong wire knife, moving hand, etc., in order to prevent unnecessary short-circuit accident of the switching power supply.
- +1 Like
- Add to Favorites
Recommend
- Efficiently Power Your Devices with ZOEYGO 120V AC to 12V DC Converter
- Why Choose ZOEYGO DC-DC Converters?
- Power Up Any Device with Zoeygo 12V AC-DC Converter
- ZOEYGO DC DC Converter DPX Series Is Widely Used for Its High Efficiency, Compact Design and Exceptional Performance
- AC-DC Switching Power Supply – A Comprehensive Guide
- How to Convert 110V AC to 12 Volt DC
- Efficient AC to DC Conversion with the 12V Converter Module
- Is a Custom Power Module Better than a Regular Power Module
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
