3.5MHz Low-Power 36V Operational Amplifiers WS742906 is Available with MSL 3 Level in SOP-14L and TSSOP-14L Package
WS742906 consists of dual channel independent, high gain, internally frequency compensated Operational Amplifiers which are designed specifically to operate from a single power supply over a wide range of voltages. These devices are particularly useful in interface circuits with digital systems and can be operated from a single common 5VDC power supply.
The WS742906 Operational Amplifiers is available with MSL 3 Level in SOP-14L and TSSOP-14L package. Standard products are Pb-Free and halogen-Free.
Features
Single Supply Voltage: 3~36V
Quiescent Current per Amp: 120μA Typical
GBWP: 3.5MHz
Slew Rate: 2V/μs
Offset Voltage: 4mV Maximum
Offset Voltage Temp. Drift: 3μV/℃
THD+N : -100dB
CMRR/PSRR/Gain: 130/120/125dB
Output Short-Circuit Curr. : 21mA
Input Common-Mode Voltage Range Includes Ground
No Output Crossover Distortion
No Phase Reversal from Overdriven Input
Rail-to-Rail Output Swing
-40℃ to 125℃ Operation Range
Applications
Walkie-Talkie
Battery Management Solution
Transducer Amplifiers
Summing Amplifier
Multivibrators
Oscillators
DC Gain Blocks
Absolute Maximum Ratings
ESD, Electrostatic Discharge Protection
Order information
- +1 Like
- Add to Favorites
Recommend
- WILLSEMI WS722377 13MHz Low Noise CMOS Operational Amplifiers Available in SOP-8L, MSOP-8L, and DFN3x3-8L Packages
- OMNIVISION Expands Automotive TheiaCel™ Technology Portfolio with New 5MP Image Sensor
- OMNIVISION Introduces 1/2.88-inch Small-Format 50-Megapixel Image Sensor with Video HDR for Multiple Smartphone Cameras
- Capless 2Vrms to 3Vrms Audio Driver with Adjustable Gain WS74607, Designed to Optimize the Audio Driver Circuit Performance While Reducing the BOM Cost
- 18MHz Rail-to-Rail Input Output CMOS Operational Amplifiers WS72412, Featuring Low Current Noise, High Slew Rate and Wide Signal Bandwidth
- 1550MHz~1615MHz CMOS High Gain GPS LNA WS7916DC-6/TR, Requires Only One External Inductor for Input Matching
- Capless 2Vrms to 3Vrms Audio Driver with Adjustable Gain WS742128D Offers 3Vrms Output at 600Ω Load with 5V Supply
- Capless 2Vrms to 3Vrms Audio Driver with Adjustable Gain WS742128, Designed to Optimize the Audio Driver Circuit Performance and Reduce the BOM Cost
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.