Kinetic Technologies’ Enters the Automotive Market with KTS1640Q and KTS1641Q, AEC Q100 Qualified 6A, Reverse Battery Protected Load Switches with OVP
KTS1640Q and KTS1641Q: 40V Automotive OVP Load Switches Protect Against Reverse Battery to -28V
Power management leader Kinetic Technologies has announced its entry into the automotive market with two new additions to its innovative power-management solutions; the KTS1640Q and the KTS1641Q Reverse Battery Protected Load Switches. These reverse battery protected load switches with OVP control protect system loads from the harsh environment of automotive.
“The move into the Automotive market signals an important milestone for Kinetic Technologies,” says David Nam, Vice President of Kinetic Technologies, “and cements our position as the leading provider of robust protection and efficient power management solutions.”
He continues, “The KTS1640Q and KTS1641Q are our first AEC Q100 qualified products and are specifically designed to protect automotive systems against the rigorous demands of the automotive environment. These 40-volt switches not only protect from reverse battery conditions down to -28 volts but also feature overvoltage protection, turning off the load if the input voltage exceeds an internally set voltage.”
Both switches operate from a wide input supply voltage of 6 volts to 24 volts and can withstand an input voltage of up to +40V. Each switch features an internally set overvoltage trip point that will turn off the switch when exceeded. The KTS1640Q has an OVP trip point of 27V, while the KTS1641Q has an OVP trip point of 20.3V. An active low-enable pin allows the switch to be enabled or disabled, placing the device in low-current shutdown mode, and system monitoring is provided by a fault FLAG. A battery detect pin (BDET) provides an always ON, reverse battery protected input supply that can be used to power controller modules. Over-temperature shutdown safety protection is provided with auto-retry. The KTS1640Q and KTS1641Q are also fully ESD protected to comply with the IEC61000-4-2 (Level 4) specification.
The KTS1640Q and KTS1641Q are available in an advanced, green compliant, TDFN44-12 package.
Key applications for the KTS1640Q and KTS1641Q include automotive load switching, reverse power supply protection, industrial and medical systems, portable instrumentation, and telecom, server, and networking systems.
- +1 Like
- Add to Favorites
Recommend
- Kinetic Technologies Announces Industry’s First Qi v1.3 Certified Wireless Power Receiver KTE7000
- Kinetic Technologies’ Latest Overvoltage Protection Device KTS1676 Offers Device Protection from Surges of up to ±100V
- Eliminate the Need for TVS Diodes and Gain ESD, Surge and Overvoltage Protection for USB Type-C Ports with Kinetic Technologies‘ KTU1108
- Kinetic Technologies‘ Advanced Video Protocol Converter MCDP5200 Elevates Productivity and Gaming Experiences to New Heights
- Kinetic Technologies Introduced Highly Optimized, Ultra-Low Power MST Hub KTM5000 with DSC Support
- USB Type-C Data Line Overvoltage Protection IC KTU1001 from Kinetic Technologies Saves Power and Delivers Fastest Fault Response Time
- Kinetic Technologies’ Low RON Load Switch KTS1677A Isolates and Protects Against Abnormal Voltage and Current Conditions
- Kinetic Technologies Launches Family of LED Backlight Drivers KTD3133/4/6/7 with Single Inductor Support for Integrated Panel Camera Flash
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.