Yint Electronics Offers TVS and Electrostatic Protection Devices for PEPS Smart Key Protection Solution
The circuit protection of PEPS smart keys mainly includes the following aspects:
1、Power management unit protection
The PEPS smart key is mainly powered by batteries (such as CR2302). When the environment changes, there may be a surge impact on the power supply terminal of the main control IC. It is recommended to use YINT Electronics transient suppression diode TVS SMF5.0CA for surge protection.
Fig.1
Table.1
2、Button unit protection
The PEPS smart key retains the traditional RKE button unit, which is in line with the habits of many people. Figure 2 shows the circuit protection scheme that retains the unlock, lock, and trunk buttons. The button unit circuit may generate electromagnetic disturbances such as static electricity when the button is pressed, released, or detected by the human body, which is transmitted to the I/O port of the main control IC and affects the normal operation of the main control IC. At the TVS2/TVS3/TVS4 position between the button and the I/O port of the IC, Yint Electronics recommends using the electrostatic protection device YINT ESD5V0D5B, SOD523 small package to protect the button unit circuit.
Fig.2
Table.2
3、LF low frequency receiving module protection
The PEPS smart key is equipped with a low-frequency LF receiving module and a low-frequency antenna. It is recommended to use Yite Electronics' ultra-small package SOD923 or SOD882 packaged electrostatic protection devices ESD5V0D9B and ESD5V0D8B to protect the low-frequency receiving module from static electricity.
Fig.3
Table.3
4、RF radio frequency transmitting module protection
Similar to the high-frequency information-receiving module of the PEPS base station, the PEPS smart key also requires electrostatic protection. Considering the space of the key, it is recommended to use Yint Electronics' ultra-low capacitance <1pF, ultra-small package SOD923 or SOD882 electrostatic protection device (such as ESDULC5V0D8B, SOD882,0.5pF) for circuit design.
Fig.4
Table.4
- +1 Like
- Add to Favorites
Recommend
- Yint Electronics Recommends Main MCU Power Supply Side Surge Protection Device SMF5.0CA for Chip Power Supply Terminal Protection
- A 12V DC Lightning Protection Solution from Yint
- Yint Electronics Recommends Using a Varistor for Input Overvoltage Protection of Smart Meters
- Yint Electronics Provides Effective Circuit Protection for UWB Positioning Base Stations
- Yint Electronics MOV 14D561K, TVS SMBJ6.5CA P6SMBJ10CA for Power Line Carrier PLC Interface Circuit
- How To View The Importance Of Power Surges To The System？
- YINT‘s Remote Centralized Meter Reading System and Its Circuit Protection Solutions
- The Rise in Copper Prices And Its Impact on Electronic Component Costs
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
