What are the Influencing Factors of 1.27mm SMT Box Header Introducing M8 Connector?

2023-09-26 ELETE News
M8 connector,smt box header,ELETE

With the rapid economic development, all walks of life have used the M8 connector, which has led to an increase in its demand. So do you know what factors affect its work efficiency and service life? Let's follow the editor of 1.27mm smt box header to have a simple understanding!


In fact, the main influencing factors include temperature, voltage, current, insulation, waterproof and moisture-proof, and so on. Let me give you a brief introduction.



1. The influence of temperature on the M8 connector. Temperature can change its physical state, which is an important factor affecting performance. Because of the different seasons and different regions, the ambient temperature may vary greatly. After the M8 connector is connected, the current will generate heat when the current passes, then the result is a temperature rise. The addition of the two may affect the use of the connector. effect. A good M8 connector should have very good resistance to high and low temperatures, and the built-in metal components should be able to maintain the physical state within a certain temperature, without deformation, expansion, and shrinkage. Usually, it can withstand a higher temperature of 85 degrees and a lower temperature of minus 25 degrees.


2. The influence of humidity on the connector, waterproof is a technical index required by many M8 connectors. Because water is corrosive to metal components, it can also conduct electricity and reduce insulation, thereby reducing the efficiency of its use, so high water resistance is the key. The former requires the M8 connector to have very good corrosion resistance and can effectively resist the corrosive effects of various acids and smoke. Impact resistance is mainly required for some special occasions, such as the transportation and aviation industries.


In summary, the editor of the 1.27mm smt box header introduces some related knowledge of the influencing factors of M8 connector. I hope you can learn more through the introduction of the editor above.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: