Wevo’s Potting Compounds and Adhesives Enable Modern Environmental Technologies

2023-04-29 Wevo News
adhesives,potting compounds,epoxy resin potting compounds,polyurethane resin potting compounds

Air quality control, water treatment, and waste separation are key aspects of modern environmental technologies. Depending on the application, the increasingly smart components necessary for this purpose have to be reliably protected from challenging environmental conditions such as dust and moisture, aggressive media, or mechanical stresses, for example, due to vibration. Wevo-CHEMIE GmbH’s specially developed potting compounds and adhesives based on polyurethane, epoxy resin, and silicone offer customized solutions for a wide range of requirements and applications.

Wevo products enable smart and durable components in fields like water and waste management or filtration


Often permanently installed underwater, buried in the ground, near busy roads, or on their surfaces – digitalized environmental technologies create a need for sensitive electrical and electronic components. Their job is to enable environmental parameters like temperature, pressure, pollutants, or filling levels to be monitored in real-time. The antennas, transponders, measuring instruments, or sensors required for this purpose are reliably protected against environmental influences such as moisture, rain, salt, or exhaust emissions using customized polybutadiene- or silicone-based potting compounds from Wevo. An interference-free transmission of radio waves is likewise assured.


SAFE AND DURABLE COMPONENTS FOR SMART WATER MANAGEMENT

Digital sewer manholes send an alert if the strainer is full, helping to prevent flooding. Also, to avoid overloading the sewer systems and flooding roads or underpasses, flow meters provide timely warnings to sewage treatment plants in the event of heavy rain, storm surges, or other adverse weather conditions. Wastewater flows can be diverted into stormwater retention basins in this way before it gets too late. Wevo potting compounds protect essential components not only from moisture but also from mechanical loads, for instance, when a vehicle drives over a manhole.


Wevo materials are additionally used in irrigation pumps and drainage pumps: silicone gels protect sensitive electronic components against moisture, for example – their high elasticity and low glass transition temperature guarantee reliable operation even at very low outdoor temperatures. Moreover, if the stator of the pump motor is fully encapsulated without voids, heat is dissipated efficiently because the specially developed polyurethane resin potting compounds and epoxy resin potting compounds are thermally conductive and resistant to high temperatures. The motor accordingly operates reliably over a long period.


WEVO PRODUCTS FOR AIR FILTERS AND WATER FILTERS

Amongst other things, Wevo adhesives and potting compounds based on epoxy resin and polyurethane provide high chemical resistance in filtration plants for treating drinking and waste water or for seawater desalination. Their adapted flow properties and good adhesion ensure a reliable bond between the filter media – ceramic materials or polymeric hollow fibers, for example – and the filter module housing. Wevo products are therefore suitable for potting filter elements. In addition, the company has developed adhesives and potting compounds based on silicone and transparent polyurethane for the manufacturing of UV water disinfection lamps. With their high resistance to UV radiation and oxidation, they also can withstand the aggressive UV-C radiation from the disinfection lamps while their low water absorption moreover is the key to a long service life.

Industrial filter systems for air quality control and pollution reduction are particularly challenging to construct. Protection against production emissions – in other words, ultra-fine particles like oil or dust – guarantees compliance with prescribed limits. Wevo materials combining good adhesion with high chemical resistance enable reliable fixation of the filter media in the filtration module or housing and hence efficient, leak-free purification of waste air.


LONG-LASTING COMPONENTS FOR STATE-OF-THE-ART WASTE MANAGEMENT

When it comes to waste treatment, Wevo products are used in magnetic and induction sorting systems that achieve efficient metal recovery from mixed waste. The polyurethane and epoxy potting compounds offer optimized adhesion and low thermal expansion here. Full potting of the sensitive coils, and in some cases even the entire housing, makes hermetic sealing possible inside the sorting system’s stainless steel frame – for reliable protection. Furthermore, the fillers provide minimal heat release with low shrinkage while curing, leading to even better adhesion. 


Last but not least, Wevo products can be found in smart waste containers: the specially adjusted dielectric properties of the polybutadiene and silicone potting compounds protect transponders and antennas reliably against moisture ingress as well as aggressive decomposition gases and condensates. Thanks to interference-free data transmission, the containers can be emptied as needed.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: