Auto-grade TVS diode array TPA23C-24 is effectively dedicated to the protection of CAN Bus
CAN bus is widely used in vehicles, rail transit, medical, industrial control and other industries due to its high reliability and on-time response. For designers, this means that they must consider the electrical noise environment in a wide frequency range-from high-frequency radiated electromagnetic interference (EMI) to common mode conducted interference, and voltage spikes caused by the connection and disconnection of various loads. Although CAN buses are suitable for harsh electrical environments, they are prone to various failure modes without proper protection.
In response to the above protection requirements, DA TECHNOLOGY has launched a two-way, high-power, Auto-grade TVS diode array TPA23C-24, which can effectively protect the instantaneous shock pulse on the CAN bus.
Figure 1
As shown in Figure 1, it is the typical connection of TPA23C-24 on CAN bus circuit protection :
The appearance of the product is shown below:
Main Characteristics as following:
1. Specially designed for CAN bus protection, SOT23-3 package, Vrwm:24V ,Power: 280W
2. Bipolar design
3. Low clamping voltage and low leakage current
4. Comply with AEC-Q101 certification requirements
5. Anti-ESD ability-contact and air are both ±30KV
6. Domestic devices, competitive on price& lead time
- +1 Like
- Add to Favorites
Recommend
- The TVS protection array TPA3304P8 in the miniaturized DFN2626 SMD package of DA Technology used for RJ45, the line-to-line capacitance value is as low as 2pF
- The CC2XX series ceramic chip fuse of DA Technology has been successfully applied to the overcurrent protection of POS
- The CC2XX series ceramic chip fuse of DA Technology has been successfully applied to the over-current protection of electronic cigarettes
- The Cartridge fuse CA433 of DA Technology has been successfully applied in the overcurrent protection of the lithium battery formation system
- DA Technology SMD fuse SF303 is successfully applied to the overcurrent protection of PD charger
- The chip fuse SF303 of DA Technology has been successfully applied to the over-current protection of the AD sampling port of the electric motorbike
- DA Technology SMD big current fuse SF331 was successfully applied to the overcurrent protection of AGV
- DA Technology ESD protection array TPA143L05 applied to USB2.0 port protection
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
