R-IN32M3 Industrial Ethernet Module for IoT or Industrial 4.0 applications
In the future of Industrial Automation, the Industrial Ethernet communication protocols become increasingly important to apply the advantages of a digital communication into IoT or Industrial 4.0 applications. A machine to machine communication is necessary to implement an application for IoT or Industry 4.0, hence all future used machines should be able to communicate via Industrial Ethernet protocols. These protocols are based on international standards and ensure that the machines are talking in the same language. This offers a lot of advantages like easy commissioning, easy device replacement or device diagnostic which are requirements of end-user organizations.
1. Multi-protocol support offers flexibility and cost reduction
The Renesas R-IN32M3 Industrial Ethernet Module supports the Industrial Ethernet protocols PROFINET®, EtherNet/IP™ in one module hardware and planning to extend to EtherCAT® in the near future. With the ability to upgrade to EtherCAT® with this module, all three protocol stacks including the licences fee are packed into one module in one price.
2. Easy migration path proves to be advantages for future solutions
The physical connection of the application controller to the Module solution is done via the SPI interface. The application software will be connected with the Renesas application interface, offering an easy migration path to other Renesas MCU solutions. The R-IN32M3 module hardware is a factor of a dual port RJ45 Ethernet connector. This allows easy design-in of the module hardware with little effort of routing the PCB or modifying the existing housing, as well as an easy migration path to future Renesas MCU solutions.
3. Fast time to market with less development effort
The Renesas R-IN32M3 Industrial Ethernet Module has a Solution Kit, comprising the application examples source code for the Synergy S7 Starter Kit as well as the source for the appropriated device driver files (GSDML, EDS and ESI). A Microsoft Windows based tool chain offers an easy way to configure and update the module firmware as well as establish an Industrial Ethernet Communication to the module.
Both the R-IN32M3 Module and the Solution Kit are available for purchase in August 2020.
- 【Datasheet】R-IN32M3 Series LSI for Industrial Ethernet
- 【Datasheet】R-IN32M3 Series LSI for Industrial Ethernet DATA SHEET
- 【Datasheet】R-IN32M3 Series LSI for Industrial Ethernet
- 【Datasheet】R-IN32M3 Module (RY9012A0) Ethernet Dual-Port Module
- 【Datasheet】R-IN32M3 Module (RY9012A0) Ethernet Dual-P ort Module
- +1 Like
- Add to Favorites
Recommend
- Renesas DSP Solution on Renesas Lab on the Cloud, Input Analog Signals Directly From A Signal Generator To The Rx231 Microcontroller Evaluation Board
- Renesas‘ Semiconductor Manufacturing Factory (Naka Factory) Fire: Production Capacity Has Recovered to 88%
- Renesas’ New RZ/T2L Industrial MPU Enables Fast and Accurate Real-Time Control with EtherCAT Communication
- Renesas Announces 10 New Winning Combinations Integrating Celeno and Renesas Products
- Renesas ＆ Altran to Deploy First Social Distancing Wristwatch Using Ultra-Wideband Chipset with Low Rate Pulse
- Renesas and FAW Establish Joint Laboratory to Accelerate Development of Next-Generation Smart Vehicles
- Renesas Semiconductor Manufacturing Factory (Naka Factory)‘ Production Level Has Returned to 100%
- METZ CONNECT Connection Terminals Alternate to RJ45 Or M12 Connectors, Suitable For Industrial Ethernet Systems
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
