Photo MOSFET Solid-state Relay Features 400V Output Withstand Voltage
Hualian's photo MOSFET solid-state relay HSSR-41A01-× consists of an AlGaAs infrared emitting diode input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay action with a minimum input current of 5mA through the input LED. The relay reset with an input voltage of 0.8V or less.
Figure 1-Product
Features
● Single Channel Normally on Single-Pole-Single-Throw (SPST) Relay
● 400V Output Withstand Voltage
● 120mA Current Rating
● Low Input Current: CMOS Compatibility
● 30Ω Low On-Resistance
● Very High Output Off -state Impedance: 10 Teraohms Typical
● High-Speed Switching: 0.5ms (Ton), 0.3ms (Toff ) Typical
● High Input-to-Output Insulation Voltage: 5000 Vrms for 1 min
Applications
● Telecommunication Switching
● Data Communications
● Battery management
● Industrial Controls
● Medical equipment
● EMR / Reed Relay Replacement
Schematic Diagram
Figure 2-Schematic
- +1 Like
- Add to Favorites
Recommend
- Photo MOSFET Solid-state Relay Features Low Input Current And Compatibility with CMOS
- Photo MOSFET Solid-state Relay with 40Ω Low On-Resistance
- Photo MOSFET Solid-state Relay Features Very High Current Rating of 1800mA
- Photo MOSFET Solid-state Relay with 500mA Current Rating
- Photo MOSFET Solid-state Relay Features High Current Rating of 800mA
- Photo MOSFET Solid-state Relay Features Very High Output Off-state Impedanc of 10 Teraohms Typical
- Photo MOSFET Solid-state Relay Compatible with CMOS
- Photo MOSFET Solid-state Relay Features High Input-to-Output Insulation Voltage of 5000 Vrms for 1min
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.