Unipolar Magnetic Switch Integrating TMR Magnetic Sensor, Supporting 1.8~5.5V Wide Range Supply Voltages
MDT's (MultiDimension Technology) TMR1102 is a unipolar magnetic switch specially designed and developed for applications which require high speed, high sensitivity and high accuracy detection while meeting low power consumption requirements.
TMR1102 integrates the high accuracy push-pull tunnel magnetoresistance (TMR) magnetic sensor and CMOS circuitry including an on-chip TMR voltage generator, comparator, Schmitt trigger and CMOS output, which is able to detect the change of magnetic field and output high and low voltage signals based on a preset threshold level. An internal band gap regulator is used to provide temperature compensated supply voltage for internal circuits, and it allows a wide range of operating supply voltages from 1.8V to 5.5V.
TMR1102 is an ideal solution for many low-power, high-performance applications with micro-ampere level supply current, higher response frequency, a wide operating temperature range, and excellent anti-magnetic interference characteristics. It is available in packaging form factors of SOT23-3 (P/N: TMR1102S).
Features and Benefits:
· Tunneling Magnetoresistance (TMR) Technology
· Low Power Consumption: 1.5mA
· High Frequency Response≥1kHz
· Unipolar Operation
· Wide range supply voltages: 1.8V~5.5V
· CMOS output
· High sensitivity
· Excellent temperature stability
· High tolerance to external magnetic field interference
Applications:
· Utility meters: water, gas, and heat meters
· Solid state switches
· Position sensing
· Speed sensing
Specification:
· Type: Unipolar
· Supply Voltage: 1.8~5.5V
· Power Consumption: 1.5uA
· Operating Modes: continuous power, no duty cycling
· Sensing Direction:X-axis
· B_op (Gs, 25°C): 17
· B_rp (Gs, 25°C): 13
· Output Interface: CMOS
· Form Factor: SOT23-3
- 【Datasheet】TMR1102 MicroAmpere High Frequency Response Unipolar Magnetic Switch Sensor Datasheet
- 【Datasheet】TMR1102 MicroAmpere High Frequency Response Unipolar Magnetic Switch Sensor Datasheet
- 【Datasheet】TMR1102 MicroAmpere High Frequency Response Unipolar Magnetic Switch Sensor Datasheet
- 【Datasheet】TMR1102 MicroAmpere High Frequency Response Unipolar Magnetic Switch Sensor
- 【Datasheet】TMR1102 Microampere Unipolar Magnetic Switch Sensor
- 【Datasheet】TMR1102 MicroAmpere High Frequency Response Unipolar Magnetic Switch Sensor Datasheet
- 【Datasheet】TMR1102 MicroAmpere High Frequency Response Unipolar Magnetic Switch Sensor Datasheet
- 【Datasheet】TMR1102 MicroAmpere High Frequency Response Unipolar Magnetic Switch Sensor Datasheet
- +1 Like
- Add to Favorites
Recommend
- MDT Released TMR Magnetic Geartooth Encoders Designed for Gears in 0.4, 0.5, and 0.8 Module with Incremental Digital Outputs
- MDT Magnetometers USB25103, USB27053 with Open USB Communication Protocol Facilitate Rapid Prototyping and Customization for Magnetic Sensor Research and Development
- MDT Introduces AMR Angle Sensor Series at SPS and Electronica
- MDT Releases TMR6209 Magnetic Pattern Recognition Sensor for Banknote Validation
- MDT Released TMR4Mxx Magnetic Geartooth Sensor Series for Rotary Position and Speed Sensing with Five Gear-Module Configurations
- MDT Released TMR3004 Magnetic Angle Sensor Featuring a Large Operating Range of over 1000Oe
- MDT Released 200nA Nano-Ampere TMR Switch Sensors with Fast Response Time
- MDT Released Five New TMR Sensors in Ultra-low Power TMR Switch Series TMR1302B/TMR1303B/TMR1341XD/TMR1366/TMR1383
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.