How Can Fiber Reflector Be Used in PON Network Link Monitoring?

PublishTime： 2023-08-31 Article Source：T&S News

In the PON (passive optical network) network, especially in the complex point-to-multipoint PON ODN (optical distribution network) topology environment, the rapid detection and diagnosis of optical fiber faults have become challenging work.

Although optical time-domain reflectometer (OTDR) tools are widely used at present, OTDR detection is sometimes not particularly sensitive to the attenuation of optical signals at the ends of some ODN branch fibers or ONU fibers.

Installing a low-cost wavelength-selective fiber reflector on the ONU side is often used at present, through which accurate detection of the end-to-end attenuation of the optical link can be achieved.

1. The working principle of fiber grating reflectors

The test light pulse sent by the OTDR is mainly reflected back with a reflectivity of nearly 100% by using the fiber grating, while the working wavelength of a normal passive optical network (PON) system passes through the reflector with little attenuation because it does not satisfy the Bragg condition of the fiber grating.

The main function of this is to accurately calculate the return loss value of the reflection event at the end of each ONU branch by detecting the existence of the reflected OTDR test signal and the intensity of the optical signal. Thus, it tells whether the optical link from the OLT side to the ONU side is normal. In this way, real-time monitoring of fault points and fast and accurate diagnosis is realized.

By flexibly deploying the position of the fiber grating reflector and identifying different ODN sections, the detection and location of the ODN fault point and the cause analysis can be quickly realized, which can reduce the fault processing time and improve the test efficiency and maintenance quality.

In the first-level splitting scenario, if the return loss of the reflector of a certain fiber branch of the home increases significantly compared with the return loss value of the health file, it indicates that there is a problem with the optical fiber link of this branch. If all the fiber branches installed with fiber reflectors have an obvious return loss increase at the same time, it indicates that the main fiber is faulty.

In the secondary optical splitting scenario, the difference between return losses can also be used to accurately locate whether the attenuation fault has occurred in the distribution fiber segment or the home fiber segment. Whether it is a first-level or second-level splitting scenario, since the reflection peak will drop sharply at the end of the OTDR test curve, the return loss value of the longest branch link in the ODN network may not be accurately measured and it is necessary to measure the fiber reflection.

2. The characteristics of fiber grating reflectors

FBG reflectors can be conveniently placed in series at the end of the user. It has the characteristics of long life, stability and reliability, convenient connection of adapter structure, and so on. This is one of the reasons why fiber reflectors are the ideal optical end choice for FTTx network link monitoring.

As a fiber optical accessories supplier, T&S Communications takes a leading role in OEM and ODM service for optical fiber termination solutions. Based on T&S Communications’ excellent comprehensive capabilities, T&S Communications is dedicated to bringing fiber optical components with superior performance to next-generation communications in a green, pragmatic, and cost-effective manner.

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

New Products & Solutions

More>

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Integrated Circuits