Keysight DSOXT3FRA/DSOX4FRA/DSOX6FRA Frequency Response Analyzer (FRA) Option For Keysight 3000T, 4000A, and 6000A X-Series Oscilloscopes Data Sheet
Frequency Response Analysis (FRA) is often a critical measurement used to characterize the frequency response (gain and phase versus frequency) of a variety of today’s electronic designs, including passive filters, amplifier circuits, and negative feedback networks of switch mode power supplies (loop response). Today, engineers typically use network analyzers or standalone low-frequency FRAs to perform these types of measurements. But for the first time in an oscilloscope, automatic frequency response analysis is available for Keysight InfiniiVision X-Series oscilloscopes. This frequency-domain measurement capability is achieved with a swept gain and phase measurement versus frequency (Bode plot). If licensed with the FRA option, InfiniiVision oscilloscope uses the scope’s built-in waveform generator (WaveGen) to stimulate the circuit under test at various frequency settings and captures the input and output signals using two channels of the oscilloscope. At each test frequency, the scope measures, computes, plots gain (20LogVOUT/VIN) logarithmically and gain linearly.
– Dynamic range: > 80 dB (typical)
– Frequency range: 20 Hz to 20 MHz
– Sweep or single frequency test modes
– Fixed test amplitude or custom Amplitude Profile
– 10 to 50 points per decode
– Two pair of tracking gain and phase markers
– Plots gain and phase and tabular view of test results
– Easily export and/or save measurement results in .csv format for offline analysis
DSOXT3FRA 、 DSOX4FRA 、 DSOX6FRA 、 3000T 、 4000A 、 6000A X 、 N2870A 、 6000A 、 4000 X 、 6000 X 、 3000T X 、 4000X 、 6000X 、 3000TX |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
March 14, 2017 |
|
|
|
5992-2209EN |
|
1.6 MB |
- +1 Like
- Add to Favorites
Recommend
- Keysight Technologies Acquires Quantum Benchmar, Augmenting Keysight‘s Quantum Portfolio
- Keysight First to Gain OmniAir Qualified Test Equipment Status, Accelerating C-V2X Device Certification
- Keysight First to Gain GCF Approval of Cases for Validating 5G New Radio mmWave Devices in Standalone Mode
- Keysight Massively Parallel Board Test System Selected by LACROIX in Automotive Printed Circuit Board Manufacturing
- Keysight, TIM and JMA Wireless Join Forces to Showcase O-RAN Technology at Mobile World Congress 2021
- Keysight, Xilinx and Cisco Showcase Solutions that Support Smooth Migration from 4G LTE Networks to 5G Open RAN
- Keysight Unveils the First Media Access Control Security Test Solution for High Speed Ethernet
- Keysight, MediaTek Join Forces to Establish 5G Connectivity Based on 3GPP Release 16 Specifications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.