Sensor Evaluation Kit, SEK001 For Use with TruStability™ RSC Series and Digital Output Versionsof the HSC Series and SSC Series Board Mount Pressure Sensors

2022-07-19

●DESCRIPTION
■The Sensor Evaluation Kit, SEK001, provides an easier way to demonstrate and evaluate Honeywell's TruStability RSC Series, and the digital output versions (I²C or SPI) of the HSC Series and SSC Series Board Mount Pressure Sensors. The kit interfaces a selected sensor to an Arduino™ Uno Rev3 Microcontroller Board. Honeywell software controls the Arduino Uno Rev3 to take readings from the sensor. Sensor measurements are displayed on the user's PC and can be recorded to a .csv file for further analysis. In addition to being mounted directly on the SEK001, the sensor may also be remotely connected to the SEK001 via wire leads, allowing the sensor to be tested in adverse environments, or in a prototype product for proof of concept testing.
●FEATURES
■The SEK001 has sockets to receive TruStability HSC, SSC Series pressure sensors with I²C or SPI digital output, as well as the new TruStability RSC Series high resolution pressure sensors. The board is then plugged in as a shield board to the user-provided Arduino Uno Rev3 board. (All sensors are sold separately. Only one sensor may be evaluated at a time.)
■Five jumpers for an HSC Series or SSC Series, I²C output, 5 Vdc pressure sensor are preconfigured on the board.
■Uses an industry standard Arduino platform
■Sensor Evaluation Boards for other Honeywell sensors are under development

Honeywell

HSC SeriesSSC SeriesRSC Series

More

Part#

Sensor Evaluation KitBoard Mount Pressure Sensors

More

Sensor demonstration ]Sensor testing and evaluation ]Proof-of-concept testing ]

More

Datasheet

More

More

Please see the document for details

More

More

DIP;SMT;SIP

English Chinese Chinese and English Japanese

2017/12/18

Rev3

4.8 MB

- The full preview is over. If you want to read the whole 9 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: