STA350B, STA350BW 2.1-channel high-efficiency digital audio system Sound Terminal®Datasheet - production data

PublishTime：2022-07-26

●The STA350Bx is an integrated solution of digital audio processing, digital amplifier control, and FFX-power output stage, thereby creating a high-power single-chip FFX™ solution comprising high-quality, high-efficiency, and all-digital amplification.
●The STA350Bx is based on an FFX (fully flexible amplification) processor, a proprietary technology from STMicroelectronics. FFX is the evolution and the enlargement of ST’s ternary technology: the new processor can be configured to work in ternary, binary, binary differential and phase-shift PWM modulation schemes.
●The STA350Bx contains the ternary, binary and binary differential implementations, a subset of the full capability of the FFX processor.
●The STA350Bx is part of the Sound Terminal® family that provides full digital audio streaming to the speaker, offering cost effectiveness, low power dissipation and sound enrichment.
●The STA350Bx power section consists of four independent half-bridges. These can be configured via digital control to operate in different modes. 2.1 channels can be provided by two half-bridges and a single full-bridge, providing up to 2 x 18 W + 1 x 40 W of music output power, by using standard 4 and 8 Ω speakers. Two channels can be provided by two full bridges, providing up to 2 x 50 W of music power, by using standard 6 Ω speaker or 2 x 40 W by using 8 Ω speakers at 25 V. The IC can also be configured as 2.1 channels with 2 x 40 W provided by the device and external power for FFX power drive. If configured as mono-BTL, the latter is capable of providing up to 1 x 90 W on a standard 3 Ω load or 1 x 75 W by using a 4 Ωsetting the supply voltage at 25 V. Please refer to the package thermal characteristics and application suggestions for more details.
●Also provided in the STA350Bx are a full assortment of digital processing features. This includes up to 8 programmable biquads (EQ) per channel. Special digital signal processing techniques are available in order to manage low-frequency quantization noise in case of very low frequency cutoff filter thresholds. The coefficient range -4..4 allows the easy implementation of high shelf filters. Available presets allow the advantage of earlier time-to market by substantially reducing the amount of software development needed for certain functions. This includes audio preset volume loudness, preset volume curves and preset EQ settings. There are also new advanced AM radio interference reduction modes. Dual-band DRC dynamically equalizes the system to provide speaker linear frequency response regardless of output power level. This feature independently processes the two bands, controlling dynamically the output power level in each band and so providing better sound clarity.
●Features
■Wide-range supply voltage
◆5 V to 26 V (operating range)
◆30 V (absolute maximum rating)
■Four power output configurations
◆2 channels of ternary PWM (stereo mode) (2 x 50 W into 6 Ω at 25 V)
◆3 channels - left, right using binary and LFE using ternary PWM (2.1 mode) (2 x 18 W + 1 x 40 W into 2 x 4 Ω, 1 x 8 Ω at 25 V)
◆2 channels of ternary PWM (2 x 50 W) + stereo lineout ternary
◆1 channel of ternary PWM as mono-BTL (1 x 90 W into 3 Ω at 24.5 V)
■FFX™ 100 dB SNR and dynamic range
■Selectable 32 to 192 kHz input sample rates
■I²C control with selectable device address
■Digital gain/attenuation +42 dB to -80 dB with 0.125 dB/step resolution
■Soft-volume update with programmable ratio
■Individual channel and master gain/attenuation
■Two independent DRCs configurable as a dual-band anti-clipper (B2DRC) or independent limiters/compressors
■EQ-DRC for DRC based on filtered signals
■Dedicated LFE processing for bass boosting with 0.125 dB/step resolution
■Audio presets:
◆15 preset crossover filters
◆5 preset anti-clipping modes
◆Preset nighttime listening mode
■Individual channel and master soft/hard mute
■Independent channel volume and DSP bypass
■Automatic zero-detect mute
■Automatic invalid input-detect mute
■I²S input data interface
■Input and output channel mapping
■Up to 8 user-programmable biquads per channel
■3 coefficient banks for EQ presets storing with fast recall via I2C interface
■Extended coefficient dynamic up to -4..4 for easy implementation of high shelf filters
■Bass/treble tones and de-emphasis control
■Selectable high-pass filter for DC blocking
■Advanced AM interference frequency switching and noise suppression modes
■Selectable high or low bandwidth noise-shaping topologies
■Selectable clock input ratio
■96 kHz internal processing sample rate with quantization error noise shaping for very low cutoff frequency filters
■Thermal overload and short-circuit protection embedded
■Video apps: 576 x Fs input mode supported
■Fully compatible with the STA339BW and the STA339BWS

Brand of Product：	ST
Part#：	STA350B 、 STA350BW More Part#
Product Category：	2.1-channel high-efficiency digital audio system 、 Sound Terminal More
Application：	More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	PowerSSO-36
Language：	English Chinese Chinese and English Japanese
Date of Creation：	April 2018
Version Number：	Rev 6
Data Encoding：	018572
Data Size：	4 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 94 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

New Products & Solutions

More>

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits