B-L072Z-LRWAN1 Discovery kit for LoRaWAN™, Sigfox™, and LPWAN protocols with STM32L0
●The B-L072Z-LRWAN1 LoRa®/Sigfox™ Discovery kit is a development tool to learn and develop solutions based on LoRa®, Sigfox™, and FSK/OOK technologies. This Discovery kit features an all-in-one open module CMWX1ZZABZ-091 (by Murata). The module is powered by an STM32L072CZ and an SX1276 transceiver. The transceiver features the LoRa® long-range modem, providing ultra-long-range spread spectrum communication and high interference immunity, minimizing current consumption. Since CMWX1ZZABZ-091 is an open module, user has access to all STM32L072 peripherals such as ADC, 16-bit timer, LP-UART, I2C, SPI and USB 2.0 FS (supporting BCD and LPM).
●The B-L072Z-LRWAN1 Discovery kit includes an ST-LINK/V2-1 embedded debug tool interface, LEDs, push-buttons, antenna, Arduino™ Uno V3 connectors and USB OTG connector in Micro-B format.
●The LoRaWAN™ stack is certified class A and C compliant. It is available in the I-CUBE-LRWAN firmware package. Several examples, including an AT-command stack, are available to help users setting up a complete LoRaWAN™ node.
●The Sigfox™ stack is RCZ1, RCZ2, and RCZ4 certified. It is available in the X-CUBE-SFOX Expansion package. Several examples, including an AT-command modem, are also available to help users setting up a complete Sigfox™ node.
●Features
■CMWX1ZZABZ-091 LoRa®/Sigfox™ module (Murata)
◆Embedded ultra-low-power STM32L072CZ Series MCUs, based on Arm® Cortex®-M0+ core, with 192 Kbytes of Flash memory, 20 Kbytes of RAM, 20 Kbytes of EEPROM
◆Frequency range: 860 MHz - 930 MHz
◆USB 2.0 FS
◆4-channel,12-bit ADC, 2xDAC
◆6-bit timers, LP-UART, I2C and SPI
◆Embedded SX1276 transceiver
◆LoRa®, FSK, GFSK, MSK, GMSK and OOK modulations (+ Sigfox™ compatibility)
◆+14 dBm or +20 dBm selectable output power
◆157 dB maximum link budget
◆Programmable bit rate up to 300 kbit/s
◆High sensitivity: down to -137 dBm
◆Bullet-proof front end: IIP3 = -12.5 dBm
◆89 dB blocking immunity
◆Low Rx current of 10 mA, 200 nA register retention
◆Fully integrated synthesizer with a resolution of 61 Hz
◆Built-in bit synchronizer for clock recovery
◆Sync word recognition
◆Preamble detection
◆127 dB+ dynamic range RSSI
■SMA and U.FL RF interface connectors
■Including 50 ohm SMA RF antenna
■On-board ST-LINK/V2-1 supporting USB
re-enumeration capability
■USB ST-LINK functions:
◆Virtual COM port
◆Mass storage
◆Debug port Picture is not contractual.
■Board power supply:
◆Through USB bus or external VIN/3.3 V supply voltage or batteries
■3xAAA-type-battery holder for standalone operation
■7 LEDs:
◆4 general-purpose LEDs
◆A 5 V-power LED
◆An ST-LINK-communication LED
◆A fault-power LED
■2 push-buttons (user and reset)
■Arduino™ Uno V3 connectors
■Arm® Mbed™
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
28-June 2018 |
|
Rev 3 |
|
|
|
324 KB |
- +1 Like
- Add to Favorites
Recommend
- Rosenberger and STMicroelectronics Cooperate to Develop a Unique High-Speed Contactless Connector Based on 60GHz Wireless Technology
- MTA Announces Partnership with STMicroelectronics for Smart Tractor
- STMicroelectronics and Sierra Wireless Collaborate to Simplify and Accelerate Connected IoT Solutions Deployment
- Eclipse Global Connectivity, Smiths Interconnect and ST Engineering IDirect Collaborate to Deliver a New Airborne ISR SATCOM Capability
- ROHM Group Company SiCrystal and STMicroelectronics Expand Silicon Carbide Wafer Supply Agreement
- Rosenberger‘s Innovative Contactless Connector RoProxCon can Bridge Construction-related Air Gaps and Has A High Interference Immunity
- New High Side Switch ICs with User-Definable Protection Achieve Optimized Performance in Automotive Applications
- Acroview universal programmer heavyweight IC programming of the 32-bit microcontroller N32G4FRREL7
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.