SLG55021-200010V GreenFETTM High Voltage Gate Driver
●Overview
■The SLG55021 N-Channel FET Gate Driver is used for controlling a delayed turn on and ramping slew rate of the source voltage on N-Channel FET switches from a CMOS logic level input. Intended as a supporting control element for switched voltage rails in energy efficient, advanced power management systems, the SLG55021 also integrates circuits to discharge opened switched voltage rails. The gate driver is available in a variety of configurations supporting a range of turn-on slew rates from 0.80V/ms up to 4V/ms which, depending on load supplying source voltages in the range of 1.0V to 20V results in ramp times from 200μs up to over 20ms. Delays until the ramp begins are source voltage independent and range from 250μs to 5ms. A power good condition is output to indicate that the ramp-up slew of the source voltage is finished. Additionally, an internal discharge circuit provides a controlled path to remove charge from open power rails. The SLG55021 gate drive is packaged in an 8 pin DFN package.
■When used with external N-Channel FETs, the SLG55021 supports low transient, energy efficient switching of high current loads at source voltages ranging from 1.0V to 20V.
●Features
■5V ±5% Power supply
■SLG55021 Drain Voltage Range 1.0V to 20V
■Internal Gate Voltage Charge Pump
■Controlled Turn on Delay
■Controlled Load Discharge Rate
■Controlled Turn on Slew Rate
■Stable Slew Rate (±2% typ) over Temperature Range
■TDFN-8 Package
■Pb-Free / Halogen-Free / RoHS compliant
High Voltage Gate Driver 、 N-Channel FET Gate Driver 、 Gate Driver |
|
[ Power Rail Switches ][ Hot Plugging Applications ][ Soft Switching ][ Personal computers ][ Servers ][ Data Communications Equipment ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TDFN-8 |
|
English Chinese Chinese and English Japanese |
|
June 27, 2017 |
|
Rev 1.03 |
|
000-0055021-103 |
|
402 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.