Flow1C-4T12WTF-*-PD
●Specifications for Printed Circuit Boards
■Printed board thickness must not be less than 1.6 mm
■PCB material should comply with IEC 61249-2-7
■Both sides of the PCB should be covered with solder mask
■Minimum distance between the edge of the PCB and the centre of the pin hole: 4 mm
■Minimum distance between the centre of the pin hole and the component on the PCB: 4 mm
■Plated through-hole specifications for Press-fit pin:
▲Hole diameter before plating: 1.6 mm ± 0.025 mm
▲Thickness of the PTH wall > 25 μm Cu
▲Plated hole final diameter: 1.45 mm +0.09 mm / -0.06 mm
▲Minimum Cu width of the annular ring > 0.1 mm
▲Through hole position accuracy ±0.1 mm
▲for chemical tin plating (Sn):0.5 μm to 10 μm
■For any other requirements IEC 60352-5 standard should be considered.
|
|
|
|
Package Information |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2016.08.11 |
|
|
Rev. 51 |
|
|
|
|
|
189 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
