R8C/25 Group Timer RD in Reset Synchronous PWM Mode
This document describes how to set up and use the timer RD in reset synchronous PWM mode in the R8C/25 Group.
The application example described in this document is applied to the following MCU and parameter(s):
● MCU: R8C/25 Group.
This program can be used with other R8C/Tiny Series which have the same special function registers (SFRs) as the R8C/25 Group. Check the manual for any additions and modifications to functions. Careful evaluation is recommended before using this application note.
Note on oscillation stabilization wait time:
In chapter 4.2.1 , select the high-speed on-chip oscillator after starting the high-speed on-chip oscillator and waiting until oscillation stabilizes.
Timer RD has two 16-bit timers (channels 0 and 1). Each channel has four I/O pins.
The operation clock of timer RD is f1 or fOCO40M.
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
June 1, 2012 |
|
|
Rev. 1.10 |
|
|
R01AN1281EJ0110 |
|
|
993 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
