AD300D™ Antenna Grade Laminates Data Sheet

2019-05-25
AD300D™ High Frequency Laminates are specialty performance materials from

Rogers Corporation, specifi cally engineered and manufactured to meet the specifi c

demands of today’s base station antenna market.

AD300D laminates extend the capabilities of the successful AD300™ product grade.

This ceramic-fi lled, glass-reinforced, PTFE based material provides the controlled

dielectric constant, low loss performance, very good passive intermodulation

(PIM) response, and good circuit processability required for mobile infrastructure

microstrip antenna applications.

These fourth generation, AD300 commercial microwave and RF laminate materials

are designed with low dielectric, low cost and excellent low loss characteristics.

These ceramic-fi lled, woven fi berglass reinforced PTFE composite materials combine

a cost-eff ective construction with unique chemistry and processing to off er RF and

Microwave designers an option for improving electrical and mechanical performance

without the additional costs traditionally associated with higher performance

material options.

AD300D laminates are ideal for Base Station Antenna designs where low loss (0.0021

at 10 GHz) and low PIM (-159 dBC at 30 mils) is critical. Materials are available with

demonstrated low PIM performance, with values better than –159 dBC using two 43

dBm swept tones at 1900 MHz. Other key features include low moisture absorption

(0.04%), low z-axis CTE (98ppm/°C), high copper peel strength (18.3 pli), and good

dimensional and thermal stability. Its low dielectric constant value of 2.94 and tight

tolerance (±0.05) enables high antenna effi ciency and large bandwidth. It also

provides a degree of miniaturization that is critical to the size constraints of some

antenna designs. The low TCEr helps to maintain high antenna gain and performance

over a wide operating temperature range by minimizing resonance frequency shifts

and bandwidth roll off .

These laminates are compatible with the processing used for standard PTFE based

printed circuit board substrates.

ROGERS

AD300DAD300D™

More

Part#

Antenna Grade Laminates

More

Cellular infrastructure base station antennas ]WiMax antenna networks ]

More

Datasheet

More

UL 94 V-0

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2018/07/23

106 KB

- The full preview is over,the data is 2 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: