1 A/1.5 A/2 A Synchronous,Step-Down DC-to-DC Converters ADP2105/ADP2106/ADP2107

2022-08-05

●The ADP2105/ADP2106/ADP2107 are low quiescent current,synchronous, step-down dc-to-dc converters in a compact 4 mm × 4 mm LFCSP package. At medium to high load currents, these devices use a current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. To ensure the longest battery life in portable applications, the ADP2105/ADP2106/ADP2107 use a pulse frequency modulation (PFM) control scheme under light load conditions that reduces switching frequency to save power.
The ADP2105/ADP2106/ADP2107 run from input voltages of 2.7 V to 5.5 V, allowing single Li+/Li− polymer cell, multiple alkaline/NiMH cells, PCMCIA, and other standard power sources.
The output voltage of ADP2105/ADP2106/ADP2107 is adjustable from 0.8 V to the input voltage (indicated by ADJ), whereas the ADP2105/ADP2106/ADP2107 are available in preset output voltage options of 3.3 V, 1.8 V, 1.5 V, and 1.2 V (indicated by x.x V).
Each of these variations is available in three maximum current levels: 1 A (ADP2105), 1.5 A (ADP2106), and 2 A (ADP2107).
The power switch and synchronous rectifier are integrated for minimal external part count and high efficiency. During logic controlled shutdown, the input is disconnected from the output, and it draws less than 0.1 µA from the input source. Other key features include undervoltage lockout to prevent deep batterydischarge and programmable soft start to limit inrush current at startup.
●FEATURES
■Extremely high 97% efficiency
■Ultralow quiescent current: 20 μA
■1.2 MHz switching frequency
■0.1 μA shutdown supply current
■Maximum load current
▲ADP2105: 1 A
▲ADP2106: 1.5 A
▲ADP2107: 2 A
■Input voltage: 2.7 V to 5.5 V
■Output voltage: 0.8 V to VIN
■Maximum duty cycle: 100%
■Smoothly transitions into low dropout (LDO) mode
■Internal synchronous rectifier
■Small 16-lead 4 mm × 4 mm LFCSP package
■Optimized for small ceramic output capacitors
■Enable/shutdown logic input
■Undervoltage lockout
■Soft start
■Supported by ADIsimPower™ design tool

ADI

ADP2105ADP2106ADP2107ADP2105ACPZ-1.2-R7ADP2105ACPZ-1.5-R7ADP2105ACPZ-1.8-R7ADP2105ACPZ-3.3-R7ADP2105ACPZ-R7ADP2106ACPZ-1.2-R7ADP2106ACPZ-1.5-R7ADP2106ACPZ-1.8-R7ADP2106ACPZ-3.3-R7ADP2106ACPZ-R7ADP2107ACPZ-1.2-R7ADP2107ACPZ-1.5-R7ADP2107ACPZ-1.8-R7ADP2107ACPZ-3.3-R7ADP2107ACPZ-R7ADP2105-1.8-EVALZADP2105-EVALZADP2106-1.8-EVALZADP2106-EVALZADP2107-1.8-EVALZADP2107-EVALZ

More

Part#

Synchronous, Step-Down DC-to-DC Converterslow quiescent current,synchronous, step-down dc-to-dc converters

More

Mobile handsets ]PDAs ]palmtop computers ]Telecommunication equipment ]networking equipment ]Set top boxes ]Audio consumer electronics ]video consumer electronics ]

More

Datasheet

More

More

Please see the document for details

More

More

CP-16-20

English Chinese Chinese and English Japanese

2018/01/08

REV E

2.5 MB

- The full preview is over. If you want to read the whole 36 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: