R2025S/D High precision I2C-Bus Real-Time Clock Module

2019-05-25
The R2025S/D is a real-time clock module, built in CMOS real-time clock IC and crystal oscillator, connected to
the CPU by two signal lines, SCL and SDA, and configured to perform serial transmission of time and calendar data to the CPU. The oscillation frequency is adjusted to high precision (0±5ppm: 13sec. per month at 25°C) The periodic interrupt circuit is configured to generate interrupt signals with six selectable interrupts ranging from 0.5 seconds to 1 month. The 2 alarm interrupt circuits generate interrupt signals at preset times. As the oscillation circuit is driven under constant voltage, fluctuation of the oscillator frequency due to supply voltage is small, and the time keeping
current is small (TYP. 0.48µA at 3V). The oscillation halt sensing circuit can be used to judge the validity of internal
data in such events as power-on; The supply voltage monitoring circuit is configured to record a drop in supply voltage below two selectable supply voltage monitoring threshold settings. The 32-kHz clock output function (CMOS output) is intended to output sub-clock pulses for the external microcomputer. The oscillation adjustment circuit is intended to adjust time by correcting deviations in the oscillation frequency of the crystal oscillator.

Ricoh

R2025SR2025DR2025D-E2-FR2025a-bb-c

More

Part#

High precision I2 C-Bus Real-Time Clock Module

More

More

Datasheet

More

Lead Free

More

Please see the document for details

More

More

SOP14;SON22

English Chinese Chinese and English Japanese

2018/05/19

EA-225-160706

1.9 MB

- The full preview is over. If you want to read the whole 48 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: