R1203x SERIES STEP-UP DC/DC CONVERTER FOR WHITE LED BACK LIGHT

2019-05-25
The R1203x Series are PWM control type step-up DC/DC converter ICs with low supply current.

The R1203x is fully dedicated to drive White LEDs with constant current. Each of these ICs consists of an
NMOS FET, an oscillator, a PWM comparator, a voltage reference unit, an error amplifier, a current limit circuit, an under voltage lockout circuit (UVLO), and an over-voltage protection circuit (OVP).
The R1203x can drive white LEDs in constant current with high efficiency by using an inductor, a diode, a
resistor and capacitors as external components.
The LEDs current can be set by an external resistance value and can adjust the dimming of LEDs by CE pin
according to the signal of PWM. Feedback voltage is 0.2V, therefore power loss by current setting resistance is small and efficiency is good. Maximum duty cycle is internally fixed, Typ. 91%. LEDs can be driven from low voltage. Protection circuits are the current limit of Lx peak current, the over voltage limit of output, and the under
voltage lockout function.
It is controllable the dimming of LEDs quickly when the PWM signal (between 200Hz to 300kHz) input to CE pin. If the CE pin input is "L" in the fixed time (Typ. 0.5ms), the IC becomes the standby mode and turns OFF LEDs.

Ricoh

R1203xR1203L071B-TRR1203N071B-TR-FELQH32CN100K53LQH2MC100K02VLF3010A-100VLS252010-100LQH32CN220K53LQH2MC220K02VLF3010A-220CM105B105K06GRM21BR11E224GRM21BR71H224CRS10I30ARSX051VA-30R1203LR1203N

More

Part#

STEP-UP DC/DC CONVERTER FOR WHITE LED BACK LIGHT

More

White LED Backlight for portable equipment ]

More

Datasheet

More

Halogen Free 、 Pb Free

More

Please see the document for details

More

More

DFN1616-6B;SOT-23-6

English Chinese Chinese and English Japanese

2018/05/19

EA-271-170928

1.9 MB

- The full preview is over. If you want to read the whole 19 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: