WACKER ® T-SERIES CATALYSTS for ELASTOSIL ® RTV-2 Silicone Rubber

PublishTime：2024-12-30

■Flexible molds and printing pads can be produced with condensation-curing ELASTOSIL® M products. The best choice of catalyst for the product is indicated on the respective ELASTOSIL® M Technical Data Sheet (TDS).
■The following guidelines on WACKER T-Series catalysts show the full choice of catalysts available and support you in choosing the right catalyst or catalyst mixture for your specific use case:
●Achieve high number of copies for polyurethane and polyester resin castings with our specialized catalysts
●Achieve the required pot life and curing time by varying dosage rate or by blending with a fast catalyst
●For a better mixing control the transparent WACKER ® T-Series catalysts can be colored by adding a small amount of WACKER ® Color Solution Red.
■Catalysts with Special Performance
●Standard catalysts: T 21 and T 51
●Catalyst T 21 or T 37 for high numbers of copies for polyurethane casting resins
●Catalyst T 51 for high numbers of copies for polyester casting resins
●Catalyst T 47 for fast and very fast curing rates
■Pot Life and Curing Time
●The pot life and curing rate of ELASTOSIL ® M products can be adjusted within a wide range, either by varying the amount of T-Series catalyst (no more than 2 - 3% on top of the recommended dosage; may increase linear shrinkage), or by blending with Catalyst T 47.
●Pot life can be adjusted from a few minutes up to 120 minutes in this way, with curing rates from 1 to 24 hours at room temperature.

Brand of Product：	WACKER
Part#：	T-SERIES 、 T 21 、 T 51 、 T 47 、 T 37 、 T 40 More Part#
Product Category：	CATALYSTS More
Application：	[ MOLDMAKING ][ PAD PRINTING ][ RTV-2 Silicone Rubber ] More
Data Type：	Supplier and Product Introduction More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	03.24
Version Number：
Data Encoding：	7831en
Data Size：	335 KB

Data section preview(2pages)

- The full preview is over,the data is 2 pages -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits