CPL25 LED EMERGENCY BATTERY PACK INVERTER
▲CONSTRUCTION
●Maintenance-free NiCd battery
●Microprocessor-based controller encased in single polymer housing
●Flexible Metal Conduit (FMC) houses all external wires for fixture connections
▲INSTALLATION
●The CPL25 battery pack inverter does not affect normal fixture operation and may be used with a switched or unswitched fixture
●If a switched fixture is used an unswitched AC power supply must also be connected to the CPL25, and must be fed from the same branch circuit as the fixture’s AC ballast
●For remote installation, the CPL25 may be installed up to 250 feet from the fixture.
▲SELF DIAGNOSTIC FEATURES
●Fault Conditions Detected : Low Battery Voltage, Low Charge Current, High Load Current
▲ELECTRICAL
●Input Voltage : 120/277VAC
●Output Voltage : 120/277VAC
●Max. Output Capacity : 25 Watts
●Max. Output Current : 208mA (120VAC), 90mA (277VAC)
●Charge Current : 450mA
●Max. Recharge Time : 32 hours
▲CERTIFICATIONS
●cULus
●NFPA 101
●NFPA 70
▲WARRANTY
●2 year full unit warranty
■FEATURES
●90 Minutes of Full Lumen Output
●25 Watt Output Capacity
●Auto-Select 120/277VAC Input/Output
●Compatible with Switched and Unswitched Loads
●Full Battery Recharge in 32 hours after complete discharge
●Remote Test Switch included standard
●Damp Location Listed for 20°C - 40°C operation
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
05/25/22 |
|
Rev 05/25/22 |
|
COM_CPL25_SPEC_R01DATE |
|
400 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.