SCANWORKS® PXI-1000 HARDWARE KIT
■The PXI-1000 hardware kit is a high throughput, flexible JTAG (IEEE 1149.1 and IEEE 1149.6 boundary scan standard) controller and single port pod for the ScanWorks platform for embedded instruments. The PXI-1000 applies tests generated by test technologies supported by the ScanWorks platform, including boundary-scan test (BST), processor-controlled test 1 (PCT), FPGA-controlled test (FCT), and IJTAG test. The test, validation,debug and programming operations supported by ScanWorks cover a wide range of processes, including the following: the BST tool supports structural tests for shorts and opens, scan path verification, interconnect tests, device programming, and memory access tests; the PCT tool supports functional test with structural fault detection and device programming, and the FCT tool supports using an existing functional FPGA as an embedded board tester and for device programming, the IJTAG test supports accessing embedded instruments based on the IEEE P1687 and IEEE 1500 standards. The PXI- 1000 integrates seamlessly into any test executive and development environment including LabVIEW, LabWindows™, TestStand, Test Studio, Visual Studio, and others.
●FEATURES
■The PXI-1000 hardware kit comes with a PXI controller card and a single-port interface pod for connecting ScanWorks running on a personal computer to the unit under test (UUT). The pod can be up to 50 feet from the controller card and still support the maximum boundary-scan test clock (TCK) frequency of 50 MHz. ScanWorks supports up to eight PXI-1000 controllers in one personal computer (PC) for a total of eight Test Access Ports (TAPs) in a maximum configuration. The scan path mapping and configuration is handled through software. For controlling and monitoring non-boundary-scan signals, each PXI 1000 has eight discrete I/O (DIO) signals that can be manipulated individually. Voltages for each TAP port and DIO signal can be controlled individually via software, as well as individual termination on each TAP and DIO signal.
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2013/4/24 |
|
|
|
|
|
|
|
|
297 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
