OAK-SoM - Myriad X SoM Datasheet

2024-11-26
●Description
■The Luxonis OAK-SoM is a system-on-module (SoM) designed for integration into a top-level system with a need for a low-power, 4 TOPS AI vision system. The OAK-SoM interfaces with the system through a single 10-gbps-rated 100-pin DF40C-100DP-0.4V(51) board-to-board mezzanine connector which carries all signal I/O as well as 5V input. The on-board SMPS system regulates the 5V input and provides all necessary digital and analog power. An auxiliary power port is offered to interface without connection to a baseboard.
■Core digital electronics on the OAK-SoM include the Movidius Myriad X VPU (MA2485-C0), a 16MB QSPI NOR flash, and 32kb EEPROM.
■USB 3.1 Gen1, QSPI, UART, I2C, and SDIO are all broken out from the SoM and routed through the mezzanine connector to the system. Additionally, the OAK-SoM SoM exposes two 2-lane MIPI CSI-2 D-PHY channels and one 4-lane MIPI CSI-2 D-PHY channel, allowing for multiple camera inputs.
■Power-on Reset BOOT configuration can be modified with on-board resistor straps, and a 10-pin JTAG connector is also provided on-board to allow for debug without the need for a baseboard.
■SoM power consumption is use-case dependent, but typical consumption is under 5W with thermal mitigation.
●Features
■Intel Movidius Myriad X VPU ma2485-C0
■16MB QSPI NOR Flash (optional)
■32Kb I2C EEPROM
■USB3.1, gen1 5gbps
■1x 4-Lane MIPI CSI-2 D-PHY
■2x 2-Lane MIPI CSI-2 D-PHY
■QSPI, SDIO, UART, I2C
■Boot Modes Supported: USB, NOR
■On-board power generation

Luxonis

OAK-SoM

More

Part#

system-on-moduleSoM

More

Industrial automation ]Robotics and autonomy ]Security systems ]Remote intelligence ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

Mar. 2021

2 MB

- The full preview is over. If you want to read the whole 14 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: