FDN-SFP-10G-TD-80DXX SFP+ C-Band Tunable DWDM Optical Transceiver
●11.3 Gbps. The module complies with the Enhanced Small Form Factor Pluggable Module (SFP+) specification SFF-8431 Rev. 4.1 for the electrical interface, SFF- 8432 Rev. 5.0 for the mechanical interface, SFF-8690 Rev. 1.4 for the tunability interface, and SFF-8472 Rev. 11.0 for the management interface.
●The transceiver complies with IEEE 802.3-2012 clause 52 10GBase-ZR/ZW (Ethernet), 10GFC (Fibre Channel) and corresponding forward error correction (FEC) rates. It also supports Telcordia GR-253-CORE OC-192 LR-2 and ITU-T G.959.1 P1L1-2D2 data rates.
●Functional Description
■The transceiver integrates the receive and transmit path on one module. In the transmit side, the serial data stream is passed from the electrical connector to a modulator driver. The modulator driver biases and modulates a C-Band cooled tunable transmitter, enabling data transmission over up to 80 km of single-mode fiber through an industry standard LC connector. In the receive side, the 10 Gbps optical data stream is recovered from an avalanche photodetector (APD) through a transimpedance amplifier to the electrical connector. This module features a hot- pluggable SFI compliant limiting electrical interface.
■The transceiver is a fully duplex serial electric, serial optical device with both transmit and receive functions contained in a single module that provides a high- speedserial link at signaling rates from 9.95 to 11.3 Gbps.It is compliant with IEEE 802.3-2012 clause 52 10GBase-ZR / ZW (Ethernet), 10 GFC (Fibre Channel), and corresponding FEC rates. The module complies with the SFP+specification SFF- 8431 Rev. 4.1 for the electrical interface, SFF-8432 Rev. 5.0 for the mechanical interface, SFF-8690 Rev 1.4 for the tunability interface, and SFF-8472 Rev. 11.0 for the management interface. A block diagram is shown in Figure 1 below.
■The transceiver has several low-speed interface connections. These connections include: transmitter fault (Tx_Fault), transmitter disable (TX_Disable), rate select (RS0 and RS1), module absent (Mod_ABS), receive loss of signal (RX_LOS), and a 2-wire serial interface clock(SCL) and data (SDA).
■The transceiver supports an SFI electrical interface. The electrical interface is based on a high-speed, low-voltage logic AC-coupled limiting interface with a nominal differential impedance of 100Ω.
●Key Benefits
■Supports line rates from 9.95 to 11.3 Gbps
■Full C-Band tunable laser source
■50 GHzITU channel spacing
■80 km reach
■Operating temperature range of –5°C to 70°C
■Maximum power dissipation of 2 W
■Limiting SFI AC-coupled electrical output interface
■Supports digital diagnostic monitoring
|
SFP+ C-Band Tunable DWDM Optical Transceiver 、 Tunable SFP+ Optical Transceiver 、 fully duplex, integrated fiber optic transceiver 、 transceiver 、 fully duplex serial electric, serial optical device |
|
|
[ Wide AreaNetwork ][ WAN ][ Local Area Network ][ LAN ][ Storage AreaNetwork ][ SAN ][ Ethernet switches ][ Ethernet applications ][ Fibre Channel switches ][ Fibre Channel applications ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2018/5/24 |
|
|
|
|
|
|
|
|
435 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
