SPB series CENTRIFUGAL BLOWER engineering data and specifications
■Wheels shall be 319 or 356T6 cast aluminum with integral cast hub and blades. Blower housing shall be 14 gauge stamped steel with round inlet and discharge for connection to hose or duct without using a transition piece. Blower housing to have a baked, powder coat finish inside and out.
■Fan motor and fan bearing vibration levels shall not exceed 1.5 mils displacement at 3450 RPM. Shafts shall be turned, ground and polished steel (or stainless steel). All fan shafts shall receive a rust preventive coating prior to shipment.
■Fan bearings shall be grease lubricated, heavy duty, self-aligning ball bearings mounted in cast iron pillow blocks. V-belt drives shall be selected for a minimum of 1.3 times nominal horsepower.
■Fan construction shall be AMCA Type B spark-resistant if an aluminum ring is added around the fan/motor shaft.
|
SPB 、 SPB series 、 SPB-9 、 SPB-12 、 SPB-15 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
4/2024 |
|
|
ISSUED 4/2024 |
|
|
CF-SPB-TECH-24 |
|
|
3.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
