PBS series CENTRIFUGAL BLOWER engineering data and specifications
■All fan performance shall have been tested per AMCA Standard 210. Fan motor and bearing vibration levels shall not exceed 1.5 mils displacement at 3450 RPM. Wheels up to 13” diameter shall be statically balanced. Wheels over 13" diameter shall be dynamically balanced.
■All blower housings shall be continuously welded. Housing, wheel and base gauges shall be as shown on page 14. Fan bearings shall be heavy duty, grease lubricated, self aligning ball bearings mounted in cast iron pillow blocks. V-belt drives shall be selected for a minimum of 1.3 times nominal horsepower.
■Before painting, steel parts shall be cleaned by detergent wash, phophatized and painted with oven cured gray enamel. All Arrangement 1, 8 and 9 fan shafts shall receive a rust preventative coating prior to shipment. Shafts shall be turned, ground and polished steel (or stainless steel).
■All parts in contact with the airstream shall be standard mild steel or stainless steel as specified. For AMCA Type A or B spark resistant construction, see the PB Series, Cast Aluminum Pressure Blower catalog.
|
PBS 、 PBS series 、 PBS-9 、 PBS-10A 、 PBS-12A 、 PBS-14A 、 PBS-15A 、 PBS-18 、 PBS-18WA |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
3/2024 |
|
|
ISSUED 3/2024 |
|
|
CF-PBS-TECH-24 |
|
|
4.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
