MODEL 3000 Controllers
■The Model 3000 Dynamatic Analog Controller is a complete controller on one printed circuit board. Input is 115 VAC, single phase, 50/60 Hz. Output is 5.5 Amp, 45 VDC and is available for use with Air-Cooled Drives rated .25 through 20 horsepower; or 4.3 Amp, 90 VDC which is available for use with Dynamatic Air-Cooled Drives rated .25 through 200 horsepower. The controller will provide either speed control or torque control, depending on the positioning of an on-board jumper. To accommodate a wide range of drive sizes and time constants the controller is manufactured in two separate versions to optimize performance: one for integral horsepower drives and the other for fractional horsepower drives. Not recommended for continuous low speed operation under 200 RPM.
●Features & Benefits
■Provides soft starts with a linear acceleration circuit, adjustable from 1-30 seconds.
■Accurate speed control through closed loop control, which keeps drive output speed within 0.5% for load changes from 0-100%.
■On-board, selectable speed or torque voltage control allows application versatility.
■Stopping brake circuit is adjustable from 0-45 VDC.
■Optional small wall mount enclosure is complete with easy-to-understand operator’s elements.
■Short circuit and ground fault protection by fused input isolates controller components from short circuits.
■Transient suppression by input suppressor prevents controller damage due to transient spikes.
■Compatible with existing wiring and plant power with a low installation cost.
■Controller and operator’s station can be mounted up to 500 feet from the drive when proper wire size and type are used. Can be used in hard-to-get-at locations.
MODEL 3000 、 3000 、 15-000595-0001 、 15-000588-0001 、 15-000588-0002 、 15-000595-0003 、 15-000588-0003 、 15-000588-0004 、 15-000889-0001 、 15-000888-0001 |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2021/8/20 |
|
|
|
|
|
263 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.