MODEL AP235 MAGNETOMETER SENSOR
■ Complete 3-axis fluxgate system
■ Low noise level
■ Measures up to ±2.0 G
■ Piccolo™ compatible
■ Compact size, rugged construction
■ Noise Level: 3.0 μG RMS/√HZ
●AP235 is an all-in-one 3-axis fluxgate magnetometer with high accuracy. Unlike other fluxgate magnetometers, AP235 does not require any external Data Acquisition Unit (DAQ) or analog circuitry.
●AP235 delivers up to 30 samples per second from all three axes placing it among the fastest fluxgate magnetometers. AP235 and fluxgate magnetometers, in general, do not experience hysteresis error as much as other types of magnetometers. As a result, they provide more accurate and reliable measurements.
●AP235 has a measuring range of ±2.0 G (± 200 μT) well above the earth’s total magnetic field. In most vehicles this provide the highest sensitivity possible without saturating. ±0.65 gauss versions available for even higher sensitivity. AP235 has a very low offset and noise level while offering exceptionally high linearity and temperature stability, making it suitable for a wide range of applications. AP235 supports a voltage range of 8VDC to 36VDC, and its specified operating temperature is -25°C to 70°C (for wider operating temperatures, please contact Applied Physics Systems).
●The AP235 simplifies and reduces the cost of the magnetic data acquisition system by eliminating the cumbersome A to D board. The system uses three separate 24-bit DAQ converters to achieve high throughput.
●Piccolo™ compatible command set is a subset of the AP235 commands. Piccolo is a trademark of Collins Aerospace.
MAGNETOMETER SENSOR 、 all-in-one 3-axis fluxgate magnetometer |
|
[ Compassing ][ Navigation ][ Attitude Reference ][ Anomaly Detection ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
JUNE 2024 |
|
REV A |
|
250-0064-5 |
|
343 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.