JoBo2.0A CANopen joystick I/O module
■The JoBo2.0A is a CANopen I/O unit especially designed for joystick applications. It provides input channels for 6 analog axes based on potentiometers or hall sensor ICs. The analog axes can be programmed to various operation modes such as standard axes with dead band in zero position, sliders or standard analog input. All analog input channels may be calibrated to adapt the JoBo2.0A to a costumer hardware. Additionally the JoBo2.0A provides up to 12 digital inputs for push buttons, switches etc. 4 channels may be used as LED output channels with PWM feature for dimming. A series resistor of 390 Ohms is already on board.
■The CAN interface comes without galvanic isolation. CANopen is available according to DS301 and DS401. All usual baud rates up to 1 Mbit/s are supported. The node ID and CAN baud rate may be set with DIP switches or may be set using the CAN interface.
|
JoBo2.0A 、 JoBo2.0A-JST 、 JoBo2.0A-MMF 、 EZ00000.2082.01 、 EZ00000.2083.01 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
03.12.2021 |
|
|
Version 2.880 Revision 002 |
|
|
|
|
|
1.5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
