Model XPS-300 Xenon Power Supply
●The rear panel has connection points for lamp power, chassis safety ground, 24VDC fan power, a normally closed fault loop circuit, 24VDC solenoid driver and signal lines indicating shutter and filter operating positions.
●The XPS-300 is power regulated and power limited to simplify operation. A single front panel knob determines the power setting for the lamp, and a connector supports PMA/DCS meter options and access to 24VDC shutter control. The internal ignition counter stops the automatic ignition cycle after approximately 5 attempts.
●An external fault loop is used to provide thermal shutdown in the event of a lamp overheating or the fan failing. The fault loop circuit provides an intrinsically safe, normally closed circuit for remote sensing elements such as interlock switches, thermal switches or vacuum sensors. The system will not restart until the lamp enable switch is reset.
●The power supply senses a lamp’s end of life condition and will shut down when the lamp voltage exceeds 30VDC. Output is short circuit protected and “arc to ground” protected. The power supply chassis is internally protected with a thermal shutdown feature if the internal temperature exceeds 90°C.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/6/16 |
|
|
Revision Level: C |
|
|
|
|
|
678 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
