SR554 — Transformer preamplifier with differential input Lock-In Preamplifier
■The SR554 can operate in one of two modes. In the “bypassed” mode, the instrument is simply a passive transformer with a turns ratio of 100, providing an overall voltage gain of 100. In the “non-bypassed” mode, an additional amplifier (gain of 5) is added, increasing the overall gain to 500 and providing a low-impedance (<1 Ω) output. In the bypassed mode, the SR554 requires no external power. When using the output amplifier, ±20 VDC must be supplied. The preamplifier connector on SRS lock-ins can be used to power the SR554.
●Transformer-coupled input
●0.1 nV/√Hz input noise
●0.1 Hz to 40 kHz bandwidth
●Gain of 100 or 500
●Single-ended and differential inputs
●>40 dB isolation from DC to 500 MHz
●Powered by SRS lock-in amplifiers
Transformer preamplifier 、 Lock-In Preamplifier 、 low-noise, transformer-coupled preamplifier 、 preamplifier |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2024/1/10 |
|
|
|
|
|
605 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.