LEE IMH 4.5 mm PRESS-IN VENT VALVE PRODUCT DATA SHEET

PublishTime：2024-10-14

■The Lee Company introduces the new 4.5 mm Press-In Vent Valve for installation into plastics, specifically designed to remove trapped air in hydraulic systems. Air can be- come trapped in a hydraulic system during an initial green run, a key off event, or after maintenance or repair. This air can interfere with system startup/priming, cause slower system reaction times or a “spongy feel”, or produce NVH (noise, vibration, harshness) problems. Traditionally, trapped air was re- moved by hand bleeding the system or by drilling a hole in the manifold to allow the air to escape back to the sump. However, hand bleeding the system results in downtime and reduced productivity, and the drilled hole method allows hydraulic fluid to continuously flow out of the system, causing significant hydraulic losses, inefficient system performance, and wasted energy. Modern technology is pushing for higher system efficiencies, greater productivity, and reduced weight and size which makes eliminating these losses more critical.
■Our new 4.5 mm Press-In Vent Valve is a novel solution for removing trapped air while minimizing hydraulic losses. The vent valve is a normally closed valve which prohibits air from being drawn back into a system during shutdown. During startup, the system pres- sure increases and opens the vent valve, allowing any trapped air to start venting. The valve then closes as the system approaches its operating pressure, which eliminates further hydraulic losses. Our unique solution for removing this unwanted air will enable system designers to optimize system component sizing, leading to improved efficiencies, reduced weight, and lower costs.
■The new vent valve’s compact size, superior performance, and ease of installation make it ideal for high-volume applications in automotive, off-road, and other industrial hydraulic systems.

Brand of Product：	LEE
Part#：	CCVP4500120S 、 CCVP4500290S 、 CCVP4500540S More Part#
Product Category：	PRESS-IN VENT VALVE More
Application：	[ automotive ][ off-road ][ industrial hydraulic systems ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	5/21
Version Number：
Data Encoding：	PDS 185
Data Size：	440 KB

Data section preview(2pages)

- The full preview is over,the data is 2 pages -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits