Model 7236 8-Channel RJ45 A/B Switch with RS232 Remote & Contact Closure Remote
●Over 45 years of being a key supplier to the MIL/COTS industry.
●INTRODUCTION
■The PathWay® Model 7236 8-Channel RJ45 A/B Switch with RS232, Contact Closure Remote allows the user the capability of sharing a single port interface device, connected to the “COMMON” port, among two other devices, connected to the “A” and “B” ports, for each channel, with remote access functionality. The Model 7236 is enclosed in a 1U, full rack size, all metal black chassis designed to fit in a standard 19” rack. The switch may be controlled manually by a front panel pushbutton or remotely from the RS232 Serial and Contact Closure port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the Remote RS232 Serial port located on the rear of the unit.
●FEATURES:
■Each channel allows access to two RJ45 networks from one COMMON network or device.
■The switch ports are transparent to all data.
■All (8) pins of the RJ45 interface are switched via a break- before-make electromechanical relays.
■The unit maintains last set position on power loss and continues to pass data.
■Upon power restore, the unit willl remain in the position it was in at power down.
■Simultaneous control of all channels.
■Front panel pushbutton control.
■Remote RS232 ASCII commands that allow the user to control switch position, lockout front panel operations, and obtain switch status, as well as query firmware version number query serial number, and enable/disable autosend of switch positions.
■Remote Contact Closure control provides dry contact logic to allow the control of the switch position.
■Front panel LED’s display present position and power status.
■Municipalities, schools, government: On GSA Schedule!
Model 7236 、 7236 、 306236 |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2024/4/10 |
|
|
|
Pub. 6271-05 |
|
643 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.