SLESD0502L Ultra Low Capacitance TVS/ESD Protection Diode
■SLESD0502L is an ultra-low capacitance Transient Voltage Suppressor (TVS) designed to provide electrostatic discharge (ESD) protection for high-speed data interfaces. With typical capacitance of 0.25pF (I/O to I/O) only, SLESD0502L is designed to protect parasitic-sensitive systems against over-voltage and over-current transient events. It complies with IEC 61000-4-2 (ESD), Level 4 (±15kV air, ±8kV contact discharge), IEC 61000-4-4 (electrical fast transient - EFT) (40A, 5/50 ns), very fast charged device model (CDM) ESD and cable discharge event (CDE), etc.
■SLESD0502L uses small DFN1006-3L package. Each SLESD0502L device can protect two high-speed data lines. The combined features of low capacitance, small size and high ESD robustness make SLESD0502L ideal for high-speed data port and high-frequency line applications. The low clamping voltage of the SLESD0502L guarantees a minimum stress on the protected IC.
●FEATURES
■Transient protection for high-speed data lines
▲IEC 61000-4-2 (ESD)
◆±15kV (Air)
◆±8kV (Contact)
▲IEC 61000-4-4 (EFT) 40A (5/50 ns)
▲Cable Discharge Event (CDE)
■Small package (1.0mm×0.6mm×0.5mm)
■Protects two data lines
■Low capacitance: 0.2pF Typical (I/O-I/O)
■Low leakage current
■Low clamping voltage
Ultra Low Capacitance TVS/ESD Protection Diode 、 ultra-low capacitance Transient Voltage Suppressor 、 ultra-low capacitance TVS |
|
[ Serial ATA ][ Desktops ][ Servers ][ Notebooks ][ PCI Express ][ MDDI Ports ][ USB Data Line Protection ][ Display Ports ][ Digital Visual Interfaces ][ DVI ][ high-speed data interfaces ][ parasitic-sensitive systems ][ high-speed data port ][ high-frequency line applications ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DFN1006-3L |
|
English Chinese Chinese and English Japanese |
|
13 April 2018 |
|
Rev.1 |
|
|
|
998 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.