ABI-TT1008S00 ABI-TT1008STR Link Length & Wiremap cabling tester RJ45, RJ11, Coax (Tone Tracer)
●ABI-TT1008S00 Link Length & Wiremap cabling tester for RJ45, RJ11, COAX links
■Inverted wires, loose wires or short-circuited wires represent 95% of all common network cabling faults. This test set will allow you to identify and remedy most of these failures. The test set also allows a quite accurate measurement of each link’s length.
■The test set consists of a local master equipped with an LCD diagnostic display and a remote slave pod.
■The master provides a test signal which is put in sequence on all the pins of the RJ45, RJ11 or Coax jack and the proper correspondence with the pins of the remote pod is verified. On the display one can see if the wires are properly connected, inverted, open circuit or short circuited. The length of each wire pair can be read from the display, the distance at which a fault occurs is also quickly identified.
■The different characteristics of different makes of cables can be taken into account by a calibration feature, starting from a reference length of cable with known length.
■Up to four different calibrations can be stored in memory and recalled when testing the specific brand or type of cable.
■The test set is compatible with UTP, FTP, STP, F²FTP, telephone pairs and coaxial links
■The master unit is powered by a 9V alkaline battery.
■The test set comes in a handy carrying pouch.
●ABI-TT1008STR Link Length & Wiremap cabling tester for RJ45, RJ11, COAX links with Tone Tracer
■This test set is identical to the one described above, plus a tone tracer device. The main unit sends a beeping tone (scan) onto a RJ45, RJ11, USB or Coax cable. At the far end the cable with the tone signal can be identified in a bundle of cables by probing with the receiver (tone tracer) unit, which will pick up the tone and amplify it when close to the cable. This is very handy when proper numbering of the cables in the bundle is lacking. An earpiece allows working in noisy conditions. The tracer is fitted with two LED lights to illuminate the working spot close up.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
06/2016 |
|
|
|
|
|
|
|
|
940 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
